LANBERG patchcord Cat.6 UTP LSZH copper 2 m green, Fluke passed

LANBERG patchcord Cat.6 UTP LSZH copper 2 m green is a 2‑metre Category 6 unshielded twisted pair (UTP) patch cable with copper conductors and a low‑smoke zero‑halogen (LSZH) jacket. It is manufactured to meet Category 6 performance and has been tested with Fluke equipment to confirm signal integrity and compliance with relevant transmission parameters. The green jacket and standard 2 m length make it suitable for structured cabling in office racks, patch panels, switches and network devices where clear cable identification and limited smoke emission are required.

Advantages

The LSZH outer jacket reduces toxic and corrosive gas output in case of fire, improving safety in enclosed or densely cabled environments. Copper conductors ensure stable signal transmission and low attenuation across the supported frequency range. Fluke testing provides documented verification of performance, useful for installations that require certified cabling components. The 2 m length and flexible sheath allow neat routing in cabinets and patching between nearby devices without excess slack.

Suitable for

• Patch panels and horizontal patching in office and data centre racks
• Connecting switches, routers and network appliances over short distances
• Environments where reduced smoke and halogen emissions are preferred for safety
• Structured cabling installations requiring Category 6 performance

Key specifications

• Category: Cat.6 UTP (unshielded twisted pair)
• Length: 2 metres
• Conductor material: copper
• Jacket type: LSZH (low‑smoke zero‑halogen)
• Colour: green
• Performance: tested with Fluke certification equipment
• Connector type: RJ45 connectors (standard 8P8C)

How to use

Insert one RJ45 connector into the network device or patch panel port and the other end into the corresponding switch, router or outlet. Ensure connectors click into place to secure the connection and avoid excessive bending near the connector boots; maintain the cable bend radius recommended for Cat.6 cables to preserve performance. For rack installations, route the patchcord along cable management channels to prevent strain and interference with adjacent cables.

Usage recommendations

For best performance, use this Cat.6 UTP patchcord for connections within a single rack or across short horizontal runs up to 2 m. Avoid running the patchcord in parallel with high‑voltage power cables to minimise potential interference, and verify connections with appropriate network testing tools after installation.