FTTH termination box LOGILINK 2 × LC/APC with 30 m connection cable

LOGILINK FTTH termination box with two LC/APC ports and an included 30 m connection cable provides a compact and organized solution for finishing fiber-to-the-home (FTTH) installations in homes and small offices. The enclosure secures fiber connections, accommodates splicing and connector mounting, and protects ferrules and fiber pigtails from mechanical stress and dust. The integrated 30 m cable allows immediate connection to indoor equipment or patch panels without additional purchasing of patch cords.

Advantages

The termination box keeps fiber connections protected in a small-footprint enclosure that is easy to mount on a wall or inside a cabinet. Two LC/APC ports support duplex single-mode links with low-loss APC connectors. The included 30 m connection cable reduces installation time by providing a ready-made link between the external drop and internal network devices. Internal cable routing and strain-relief features minimize bending and handling stress on fibers.

Suitable for

• Residential FTTH installations where a compact fiber termination point is required
• Small-business premises with single-mode duplex connections to routers or ONT devices
• Situations that require secure splicing or connectorized pigtail management inside a protected enclosure

Key specifications

• Connector type: 2 × LC/APC duplex ports for single-mode fiber
• Included cable: 30 m single-mode fiber connection cable with LC/APC connector
• Enclosure: wall-mountable fiber termination box with internal splice tray and strain relief
• Fiber management: bend-radius control and protected pigtail storage space
• Protection: dust covers for connectors and mechanical protection for splices

How to use

Mount the termination box on a stable surface near the incoming fiber entry point, taking into account the 30 m cable route to the indoor device. Open the enclosure, secure the incoming fiber to the internal strain-relief points and, if required, perform fusion splicing or install connectorized pigtails into the splice tray. Route the included 30 m connection cable through the designated outlet and plug the LC/APC connectors into the target equipment such as an ONT or patch panel. Close the enclosure and ensure dust covers are in place to protect the connectors.

Usage recommendations

For best results, avoid sharp bends or tight loops in the fiber cable, maintain minimum bend radius specified for single-mode fiber, and use proper cleaning tools for LC/APC connector endfaces before mating. When performing splicing, follow standard fusion-splicing procedures and store excess fiber neatly in the splice tray to prevent microbends and signal loss.