Fiber patch cable LOGILINK FPSLC11, 2× LC-Simplex, OS2 (G657.A2), 100 m, yellow

LOGILINK FPSLC11 is a single‑mode fiber patch cable with two LC‑Simplex connectors and OS2 fiber type (G657.A2). The cable is 100 metres long and comes in yellow, designed for use in LAN, telecom and data centre environments where single‑mode transmission and long reach are required. It is intended for backbone links, fiber patch panels and long‑distance optical signal routing.

Advantages

This fiber patch cable offers low attenuation and stable single‑mode transmission characteristics typical of OS2 (G657.A2) fibre, enabling reliable long‑distance connections. The LC‑Simplex connectors provide compact termination suitable for high‑density patch panels and equipment ports. The 100 m length reduces the number of splices or intermediate connections for medium to long runs, while the yellow jacket follows common colour coding for single‑mode installations.

Suitable for

• Backbone and horizontal cabling in enterprise LANs
• Connections between patch panels and active equipment in data centres
• Telecom and carrier infrastructure requiring single‑mode links
• Long‑distance optical runs where reduced bending sensitivity is beneficial

When it may not be suitable

This cable is single‑mode OS2 (G657.A2) and therefore not suitable for multimode applications that require MMF fiber types (such as OM3/OM4). It is supplied with LC‑Simplex terminations; installations that require other connector types or pre‑terminated duplex assemblies will need adapters or different cable configurations.

Key specifications

• Fiber type: single‑mode, OS2 (G657.A2)
• Connector type: LC‑Simplex to LC‑Simplex, two connectors
• Length: 100 m
• Jacket colour: yellow
• Application: backbone, patch panels, long‑distance links

How to use

Route the cable along designated cable trays or containment, avoiding sharp bends and tensile stress. Terminate each LC‑Simplex connector into the corresponding LC adapter or equipment port, ensuring proper alignment and clean connector end faces to minimise insertion loss. Secure the cable gently at regular intervals and avoid compressive forces at bend points. If coupling to different connector types, use appropriate adapters or transceivers designed for single‑mode fiber.

What to consider before purchase

• Confirm that your network equipment and patch panels use LC connectors and support single‑mode fiber
• Verify required cable length and routing path to ensure 100 m meets the run without excess strain
• Check whether duplex assemblies or different connector types are needed for your installation
• Ensure cleanliness and inspection equipment are available for connector end‑face maintenance

Usage recommendations

For best optical performance, clean connector end faces before connection, maintain recommended minimum bend radius for single‑mode G657.A2 fibre, and test insertion loss and continuity after installation. Use LC adapters and patch panels designed for single‑mode operation to preserve signal integrity.