Logitech Cat5e Kit Logitech 952-000019 Graphite 40m Cable

The Logitech Cat5e Kit connects Logitech Tap to the meeting room computer from up to 40 meters away using Cat5e or higher category cabling. It combines data and power over a single cable, removing the need for a separate power outlet at the table and enabling tidy installations without excess cable coils. The kit includes 10 meters of cabling, but any Cat5e or better cable can be used for runs up to 40 m. The compact graphite module measures 83 mm × 85 mm × 29 mm and supports an input voltage range of 100–240 V.

Advantages

The Cat5e Kit supplies both data and power over one cable, simplifying installation and reducing clutter. It supports cable lengths up to 40 meters, allowing flexible placement of the Logitech Tap away from the computer. Included cable and compatibility with Logitech Tap mounts (Table Mount, Riser Mount, Wall Mount) enable neat cable routing and convenient operation.

Suitable for

• Meeting rooms where Logitech Tap must be positioned away from the PC
• Installations requiring a single-cable solution for power and data
• Environments that need clean, clutter-free table areas
• Setups using Logitech Tap Table Mount, Riser Mount, or Wall Mount

Key specifications

• Maximum cable run: 40 m (Cat5e or higher)
• Included cable length: 10 m
• Input voltage: 100–240 V
• Dimensions (W × D × H): 83 × 85 × 29 mm
• Colour: Graphite
• Manufacturer part number (MPN): 952-000019
• EAN: 0097855163714

How to use

Connect the Cat5e Kit between the Logitech Tap and the meeting room computer using Cat5e or higher cabling. Use the included 10 m cable or a longer certified Cat5e/above cable for runs up to 40 m. Route the cable through the Tap Table Mount, Riser Mount, or Wall Mount as required, then plug the kit into a power source supporting 100–240 V. Verify signal and power delivery before finalising cable routing and mounting.

Usage recommendations

For reliable operation, use certified Cat5e or higher cabling and keep runs within the 40 m maximum. When possible, crimp and cut cabling to exact lengths to avoid excess coils and ensure a neat installation. Confirm compatibility with your Logitech Tap mount and check local electrical codes for power connections.