MAGNAPLAST Kineta 3 inlet with gasket type 425 RWK 425/160 mm

MAGNAPLAST Kineta 3 inlet with gasket type 425 RWK 425/160 mm is a three-way plumbing fitting designed for wastewater and drainage systems. The product integrates a sealing gasket and a structured outlet geometry to enable sealed junctions and organized entry of multiple supply lines. It is sized for installation in drainage chambers, manholes, and underground collector systems where a reliable three-way connection is required.

Advantages

The integrated gasket ensures a watertight seal at pipe connections, reducing the risk of leaks and soil ingress. The three-inlet configuration allows neat routing of up to three lines into a single chamber while maintaining separation and alignment. Constructed from corrosion-resistant materials intended for underground use, the fitting supports long-term durability in typical drainage environments. Its standardized dimensions allow compatibility with common piping and chamber systems used in civil and building drainage projects.

Suitable for

• Connecting three wastewater or drainage pipes into inspection chambers and manholes
• Branching underground collector systems in residential, commercial, or municipal installations
• Organizing multiple inflows to a single drainage chamber while maintaining sealed connections

Key specifications

• Configuration: three-inlet plumbing fitting with integrated gasket
• Type designation: RWK 425
• Outer dimensions: 425/160 mm (designation indicates main and branch dimensions)
• Application: wastewater and drainage systems, underground collector connections
• Sealing: integrated gasket for watertight joint
• Installation environment: drainage chambers, inspection pits, manholes, underground collector systems

How to use

Prepare the chamber wall or pipe connections to match the fitting dimensions and ensure mating pipe ends are clean and free of debris. Insert the MAGNAPLAST Kineta fitting into the prepared opening and align the three inlets with the incoming pipes. Push pipes into the inlets until they seat against the gasket to achieve a seal. Verify alignment and depth, then secure the assembly according to the chamber manufacturer's instructions or applicable installation standards. Inspect the sealed connections and perform a water tightness check before backfilling or returning the system to service.

Usage recommendations

For reliable performance, ensure pipes and chamber walls are cut square and that the gasket surfaces are free from dirt, grease, or damage. Use appropriate clamps or securement methods if required by local codes. Perform a pressure or water-tightness test after installation, and follow local regulations for drainage and wastewater systems during installation and backfilling.