Water Pump Makita PF0300

The Makita PF0300 water pump is a compact submersible unit designed for drainage of clear and slightly contaminated water. Equipped with a 300 W motor, the pump delivers water to a maximum head of 7 m and is suitable for water temperatures up to 35 °C. Its small footprint (168 mm width × 160 mm depth × 305 mm height) and IPX8 protection rating make it appropriate for use in wet environments where reliable, continuous operation is required. The pump runs on 230 V AC power and is intended for applications such as dewatering rain barrels, emptying swimming pools and other similar drainage tasks.

Advantages

The PF0300 combines a high-efficiency 300 W motor with a compact design to offer a balance of power and portability. IPX8 water protection ensures reliable performance when fully submerged, reducing the risk of water ingress during operation. The maximum delivery head of 7 m enables effective water removal from lower levels to higher discharge points. Its construction and specification are tailored for clear to slightly contaminated water, providing durability and low-maintenance operation in common domestic and light commercial drainage situations.

Suitable for

• Dewatering rain barrels and garden water tanks
• Emptying small to medium swimming pools and paddling pools
• Clearing flooded basements, cellars or low-lying areas with clear or slightly dirty water
• Transferring water for irrigation or temporary site drainage

Key specifications

• Motor power: 300 W
• Maximum delivery head: 7 m
• Maximum water temperature: 35 °C
• Power supply: 230 V AC
• Ingress protection: IPX8 (suitable for continuous submersion)
• Suitable liquid: clear and slightly contaminated water
• Dimensions (W × D × H): 168 × 160 × 305 mm

How to use

Place the Makita PF0300 pump in the water to be removed, ensuring it rests on a stable, level surface and is fully submerged according to the manufacturer’s minimum submersion guidelines. Connect the pump to a 230 V AC supply using a properly rated outdoor power outlet and extension if required, ensuring all electrical connections remain dry and protected. Attach appropriate discharge hose or piping to the outlet and route it to a suitable drainage point above the maximum delivery head. Switch on the pump and monitor initial operation to confirm steady flow and correct discharge. After use, turn off and disconnect power, remove the pump from the water, drain remaining fluid from the housing and hose, and store the unit in a dry place.

Usage recommendations

Use the pump only with liquids within the specified temperature range and avoid pumping heavily contaminated or abrasive slurries. Regularly inspect the inlet screen and impeller area for debris to maintain performance. Ensure electrical connections comply with local safety regulations and use a residual current device (RCD/GFCI) where applicable to reduce electrical risk during wet-area operation.