PoE injector MaxLink MAXPI60-10G 802.3af/at, 52V 580mA 60W 10 Gbit

MaxLink MAXPI60-10G is a Power over Ethernet (PoE) injector that delivers 52 V at 580 mA (60 W) and supports 10 Gbit data rates. It is compatible with IEEE 802.3af and 802.3at standards and provides both power and data over a single Ethernet cable to PoE-enabled devices. The injector is intended for inline installation between a network switch and the powered device, enabling deployment of access points, IP cameras, VoIP phones and other compatible equipment without the need for local AC power outlets.

Advantages

The MAXPI60-10G supports full 10 Gbit throughput while supplying up to 60 W of power, combining high-speed data transfer with high-power delivery in a compact inline unit. Compatibility with both 802.3af and 802.3at ensures broad device support and safe power negotiation. Its single-cable solution reduces cabling and installation complexity by delivering data and power together.

Suitable for

• Mounting or deploying Wi‑Fi access points that require up to 60 W and 10 Gbit connectivity
• Powering IP surveillance cameras, including multisensor or PTZ models with higher power needs
• Connecting and powering VoIP phones and other office equipment compatible with 802.3af/at
• Small server rooms or edge network devices where switch ports lack PoE or when centralized power is preferred

Key specifications

• PoE standards supported: IEEE 802.3af and IEEE 802.3at
• Output voltage: 52 V DC
• Output current: 580 mA (maximum)
• Maximum power delivery: 60 W
• Data rate support: up to 10 Gbit/s
• Connection type: inline PoE injector for Ethernet cabling

How to use

Install the MAXPI60-10G inline by connecting the network switch or data source to the injector's data input port and connecting the injector's output port to the PoE-capable device using an appropriate Ethernet cable. Ensure cables and connectors support 10 Gbit where high throughput is required. Verify that the powered device supports 802.3af or 802.3at and that its power class does not exceed the injector's maximum output. Provide AC power to the injector according to the included power adapter and check link and power indication lights (if present) to confirm operation.

Usage recommendations

Use high-quality, shielded or category-rated Ethernet cables (Cat6a or better) for reliable 10 Gbit performance and minimized signal loss. Avoid exceeding the injector's 60 W output when planning deployments; consider the device's power draw and cable length. For outdoor or exposed installations, use weatherproof enclosures for the injector and any connectors to protect against moisture and dust.