PoE injector MaxLink MAXPI90 802.3af/at/bt 95W 1 Gbit Ethernet

MaxLink MAXPI90 802.3af/at/bt 95W 1 Gbit Ethernet PoE injector supplies power and data over a single Ethernet cable to compatible devices where a powered switch is not available. The injector is compatible with 802.3af, 802.3at and 802.3bt standards and provides up to 95W of power while maintaining 1 Gbit/s data throughput. It is intended for installations that require a higher power budget for devices such as multi-radio wireless access points, PTZ cameras, or high-power VoIP phones and other PoE-enabled equipment.

Advantages

The MaxLink MAXPI90 supports multiple PoE standards, ensuring compatibility with a wide range of powered devices and enabling flexible deployment without replacing existing cabling. By delivering up to 95W over a single Ethernet link, it accommodates devices with higher power demands while preserving Gigabit network speeds. Its inline injector design requires minimal footprint and allows power to be added to an existing Ethernet run at the device end or at an intermediate location when a powered switch is not present.

Suitable for

• High-power wireless access points and multi-radio APs
• PTZ and other power-hungry surveillance cameras
• VoIP phones and conferencing equipment with elevated power needs
• Edge devices and network equipment in locations without PoE switches

Key specifications

• PoE standards supported: 802.3af, 802.3at, 802.3bt
• Maximum output power: up to 95 W
• Data throughput: 1 Gbit/s Ethernet
• Application: single-port PoE injector for powering one device over Ethernet
• Physical format: inline injector designed for use with standard Ethernet cabling

How to use

Connect the injector to a mains power source and link the network switch or router to the injector's data input port using a Cat5e or higher Ethernet cable. Connect the PoE-capable device to the injector's output port with another Ethernet cable; the injector will deliver both power and data to the powered device while allowing the network link to operate at 1 Gbit/s. Verify that the powered device supports 802.3af/at/bt and that its power class is within the injector's available budget before connection. Follow the device manufacturer's installation guidance for mounting and grounding.

Usage recommendations

Use Cat5e or higher-rated Ethernet cables for reliable Gigabit performance and ensure cable runs and connectors meet installation standards. Place the injector in a ventilated area away from direct heat sources. Confirm power requirements of connected devices and allocate appropriate protection such as surge protection at the power source when deploying in exposed or outdoor-adjacent environments.