Guide Bar McCulloch PREM 14" 3/8" .050 / 1.3 mm for Husqvarna chains

Replacement guide bar McCulloch PREM 14" 3/8" .050 / 1.3 mm for Husqvarna chains is a spare part designed to fit chainsaws that require a 14-inch bar with 3/8" pitch and 0.050" (1.3 mm) gauge. It provides the mounting interface and guide groove for Husqvarna-style chains, restores correct chain alignment and supports stable cutting performance for light to medium timber tasks, pruning and general maintenance cutting.

Advantages

The guide bar is manufactured to match standard dimensions for 14" 3/8" .050 bars, allowing straightforward replacement on compatible chainsaws. Its profile and groove are intended to ensure correct chain seating and even lubrication from the bar nose to the root, contributing to consistent cutting behaviour. Using a replacement bar designed for Husqvarna-style chains helps retain original chain tensioning and sprocket alignment when installed correctly.

Suitable for

• Home and garden pruning and limb removal
• Light to medium firewood and timber cutting
• Chainsaw maintenance and part replacement on saws requiring a 14" bar with 3/8" pitch and .050" gauge
• Users who need a compatible bar for Husqvarna-style chains

When it may not be suitable

This guide bar is not suitable for chainsaws that require a different bar length, pitch or gauge. It should not be used on saws requiring heavy-duty bars for industrial or continuous professional logging where longer and thicker bars are specified. Compatibility depends on the saw's required pitch, gauge and mounting specifications; mismatched parts can affect performance and safety.

Key specifications

• Bar length: 14 inches (nominal)
• Chain pitch: 3/8 inch
• Chain gauge: 0.050 inch (1.3 mm)
• Compatibility: designed for Husqvarna-style chains and sprocket alignments
• Application: light to medium cutting, pruning and general maintenance

How to use

To replace the guide bar, stop the saw, disconnect the spark plug or power source, and remove the side cover and chain. Fit the new McCulloch PREM bar onto the studs, ensuring the bar seats correctly on the mount and the oil hole aligns with the saw's oiling port. Refit the chain around the bar nose and drive sprocket, reattach the side cover, and adjust chain tension according to the chainsaw manufacturer's instructions. Check chain lubrication and perform a short test cut to confirm proper alignment and tension before regular use.

What to consider before purchase

• Confirm your chainsaw requires a 14" bar with 3/8" pitch and .050" (1.3 mm) gauge
• Verify compatibility with your saw's mounting studs and oiling port location
• Consider the type of cutting tasks (light/medium) and whether a heavier-duty bar is needed

Usage recommendations

Inspect the bar regularly for wear, burrs or bent rails; maintain correct chain tension and consistent lubrication. Use the correct chain type for 3/8" pitch and .050" gauge, sharpen cutters as needed, and follow the chainsaw manufacturer's safety and maintenance guidance to ensure safe, efficient operation.