Leave your address - as soon as the price of the product goes down, you'll know about it right away
Paper Painter's Tape MEGA 30 mm x 35 m (model 43331)
Paper Painter's Tape MEGA 30 mm x 35 m (model 43331)
In cart {{totalProductsCount}} item(s)
Your cart is empty
Paper Painter's Tape MEGA 30 mm x 35 m (model 43331)
Leave your address - as soon as the price of the product goes down, you'll know about it right away
Paper Painter's Tape MEGA 30 mm x 35 m (model 43331)
Paper Painter's Tape MEGA 30 mm x 35 m (model 43331)
Paper painter's tape MEGA 30 mm x 35 m (model 43331) is a crepe paper masking tape designed for precise indoor painting and surface protection. With a 30 mm width and a 35 m roll length, the tape is suitable for creating clean paint edges on walls, trim, mouldings and other narrow surfaces. The paper backing combines flexibility with tearability for easy application and removal without leaving excessive residue under typical indoor conditions.
The tape provides consistent adhesion and a thin adhesive layer formulated for temporary masking on painted surfaces and woodwork. Its crepe paper backing conforms to slight curves and irregularities, allowing straight lines along edges and corners. Removal is straightforward when done within recommended time frames, reducing the risk of paint lift or residue. The narrow 30 mm width enables detailed work where standard wide tapes would be impractical.
Apply the tape to a clean, dry surface free of dust, grease and loose paint. Press the tape edge firmly along the area to be masked to ensure contact, using a fingertip or a flat tool to smooth along corners and curves. Paint over the exposed area according to paint manufacturer instructions. Remove the tape by pulling it back slowly at a low angle to the surface within the recommended exposure time for temporary masking to avoid adhesive transfer or paint lifting.
For optimal results, test adhesion on a small inconspicuous area before extended use. Avoid prolonged exposure to direct sunlight or high humidity, and remove the tape within the time frame suggested for temporary masking on painted surfaces to minimize residue. Use the 30 mm width when detailed, narrow masking is required; for wider protection use a broader masking tape.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}