Submersible Pump Metabo TP 7500 SI

The Metabo TP 7500 SI submersible pump is designed for efficient water drainage and circulation with a maximum immersion depth of 7 m. Weighing 4.2 kg, it offers a compact, lightweight solution for removing fresh water from containers, tanks, swimming pools or flooded cellars and for transferring water for garden and lawn irrigation. The pump features a low intake level and reliable built-in components to support everyday water-management tasks.

Advantages

The pump provides a low residual water intake level of 2–3 mm and includes an integrated float switch for automatic operation. Built-in check valve and automatic bleed prevent backflow and make starting easier after pauses. Its compact design allows use in narrow shafts down to 20 x 20 cm. The unit includes a multi-adapter and a universal port to connect common hoses and fittings.

Suitable for

• Emptying containers and tanks
• Draining swimming pools and flooded basements
• Transferring water for garden and lawn irrigation from reservoirs
• Pumping out shallow residual water (2–3 mm)

Key specifications

• Model: Metabo TP 7500 SI (MPN 025 075 0013)
• Maximum immersion depth: 7 m
• Weight: 4.2 kg
• Residual water level: 2–3 mm
• Built-in float switch, check valve and automatic bleed
• Suitable for shafts from 20 x 20 cm
• Includes multi-adapter and universal port
• EAN: 4003665401546

How to use

Place the Metabo TP 7500 SI into the water to the recommended depth while ensuring the float switch can move freely. Connect a suitable hose to the universal port or use the supplied multi-adapter to match your fittings. Power the pump from a properly grounded outlet and allow the float switch to control automatic start/stop as water level changes. After use, disconnect power, remove the pump, drain remaining water through the outlet and store the pump dry in a ventilated place.

Usage recommendations

Use the pump only for fresh water and follow local electrical safety regulations. Regularly check the float switch, hose connections and the check valve for debris. Avoid running the pump dry for extended periods. For installation in narrow shafts, verify that the shaft dimensions meet the 20 x 20 cm requirement and that the pump can be easily retrieved for maintenance.