Submersible pump Metabo TPS 16000 S Combi

The Metabo TPS 16000 S Combi submersible pump is designed to operate at depths up to 7 m and weighs 7.8 kg. Engineered for handling both fresh and waste water, it is suitable for pumping out flooded cellars, draining containers and tanks, recirculating pool water, and supplying garden reservoirs. The pump features a robust, impact-proof plastic housing, an ergonomic carry handle and an adjustable pump base that allows switching between maximum flow and low-intake modes. A float switch with level regulation enables automatic operation, while a manual mode is available for very low intake.

Advantages

The TPS 16000 S Combi offers multifunctional performance with the ability to pump fresh water and waste water, including coarse particles up to 30 mm. Its adjustable pump base provides optimized performance for different tasks: a lower position for maximum pumping rate and an upper position for low-intake operation. The float switch supports automatic level control and can be overridden to manual mode via a push button on the mains plug for low-intake situations. Lightweight construction and an ergonomic handle make transport and positioning straightforward.

Suitable for

• Pumping out flooded cellars and basements
• Draining tanks, containers and swimming pools
• Recirculating and transferring fresh or dirty water
• Watering gardens and lawns from reservoirs
• Pumping applications where low intake (as low as 1 mm) is required

Key specifications

• Maximum immersion depth: up to 7 m
• Weight: 7.8 kg
• Low intake capability: down to 1 mm (in fresh water low-intake mode)
• Accepts coarse particles up to 30 mm (in waste water mode)
• Adjustable pump base with two positions for maximum flow or low-intake operation
• Float switch with level regulation and option to switch to manual mode
• Housing material: impact-proof plastic
• Includes angle connection piece with multi-adapter
• Ergonomic carry handle for transport

How to use

Place the Metabo TPS 16000 S Combi on a stable, level surface in the liquid to be pumped. Select the pump base position appropriate for the task: lower for maximum pumping rate (fresh and waste water) or upper for fresh water and low-intake operation. Connect a discharge hose to the angle connection piece and multi-adapter. For automatic operation set the float switch to automatic mode and adjust the float switch level as required. For very low intake change the float switch to manual mode using the push button on the mains plug and position the pump accordingly. Ensure the pump remains submerged to the required depth for proper cooling and operation.

Usage recommendations

Use the pump in accordance with local electrical safety regulations. Avoid running the pump dry and clear the intake of large debris before operation when possible. When pumping waste water with coarse particles, periodically inspect the pump base and impeller area for blockages. After use, rinse with clean water if the pumped liquid contained grit or residues and store the unit in a dry place.