Submersible pump Metabo TPS 14000 S Combi — max immersion 7 m, 7.7 kg

Metabo TPS 14000 S Combi is a submersible pump for draining and transferring fresh and waste water with a maximum immersion depth of 7 m. At 7.7 kg and with an ergonomic carry handle, the compact portable design is intended for dewatering building sites, flooded cellars, construction pits, garden ponds and other situations where reliable water removal is required. The pump housing is impact‑proof plastic and the unit includes an angle connection piece with multi‑adapter for flexible hose connection.

Advantages

The pump offers multi‑functional operation for both fresh water and waste water, with the ability to handle coarse particles up to 20 mm in diameter when used as a waste water pump. A selectable pump base position optimises performance: the lower position maximises flow for general pumping, while the upper position enables low‑intake pumping. Low intake is supported down to approximately 1 mm when configured for fresh water low‑intake mode. A float switch enables automatic level control and can be changed to manual mode via a push button on the mains plug for low‑intake operation.

Suitable for

• Emptying flooded cellars and basements
• Dewatering construction pits and trenches
• Draining garden ponds, pools and water reservoirs
• Transferring water between tanks and containers
• Pumping dirty water containing coarse solids (up to 20 mm)

Key specifications

• Maximum immersion depth: 7 m
• Weight: 7.7 kg
• Low intake level (fresh water, low‑intake mode): down to 1 mm
• Maximum conveyed particle size (waste water mode): up to 20 mm
• Housing material: impact‑proof plastic
• Pump base: adjustable between lower (high flow) and upper (low‑intake) positions
• Float switch with automatic level regulation and manual override via mains plug push button
• Connection: angle connection piece with multi‑adapter for hose attachment

How to use

Install the pump on a stable surface or suspend it to the required immersion depth, ensuring the maximum immersion of 7 m is not exceeded. Select the pump base position according to the task: lower position for maximum flow when pumping general or waste water, or upper position to enable low‑intake fresh water pumping. Connect an appropriate hose to the angle connection piece using the included multi‑adapter. For automatic operation, use the float switch and adjust its level regulation as needed. For low‑intake pumping, switch the float to manual mode using the push button on the mains plug and operate with the pump base in the upper position.

Usage recommendations

Use clean or dirty water within the specified limits: for coarse solids up to 20 mm when in waste water mode, and low‑intake operation down to 1 mm when set for fresh water. Avoid running the pump dry and ensure the voltage and power supply conform to the pump’s requirements. Clean the intake and housing after use to remove debris and prolong service life.