Shielded Cat.6A networking cable MetzConnect 0.5 m S/FTP (S‑STP) RJ‑45 gold‑plated

MetzConnect Shielded Cat.6A networking cable, 0.5 m S/FTP (S‑STP) with gold‑plated RJ‑45 connectors is designed for short patching runs in structured cabling and data centre environments. The cable meets Cat.6A/Class EA performance up to 500 MHz and supports 10 Gbit/s Ethernet and powered applications such as PoE, PoE+ and UPoE. Its S/FTP (overall braid with individually foil‑shielded pairs) construction and gold‑plated contacts reduce crosstalk and electromagnetic interference for reliable high‑speed connections between switches, patch panels and end devices.

Advantages

The fully shielded S/FTP design provides improved protection against EMI compared with unshielded alternatives while maintaining the flexibility required for short link installations. Gold‑plated RJ‑45 contacts offer low contact resistance and corrosion resistance for dependable signal transmission. The cable uses AWG 26/7 stranded conductors and a low‑smoke, halogen‑free (LSHF/LSOH) sheath suitable for indoor use. A snagless boot with integrated lever protection reduces the risk of connector damage during installation and removal.

Suitable for

• Short patch connections between switches and patch panels in server rooms and comms cabinets
• Linking network devices and workstations in office LANs
• 10 GBase‑T Ethernet and high‑speed data links
• Applications requiring shielded cabling: PoE, PoE+, UPoE and HDBaseT
• Installations where halogen‑free cable jackets are preferred for safety

Key specifications

• Length: 0.5 m
• Connector: RJ‑45 male to RJ‑45 male, gold‑plated contacts
• Cable category: Cat.6A / Class EA
• Shielding: S/FTP (overall braid + individually foil‑shielded pairs)
• Conductor: AWG 26/7 stranded, PIMF (pairs in metal foil)
• Frequency rating: up to 500 MHz
• Data rate: up to 10 000 Mbit/s (10 Gbit/s)
• Jacket: LSHF (LSOH), halogen‑free
• Standards: compliant to Cat.6A to ISO/IEC 11801 Ed.2.2 and IEC 61935‑2; GHMT certified
• Boot: snagless with integrated lever protection
• Color: green (shade may vary between production lots)

How to use

Connect the RJ‑45 plug at one end to the network port of a switch, patch panel or device and the other plug to the corresponding port. Ensure shield continuity by using metal patch panels or shielded connectors and properly grounded outlet hardware when integrating into shielded cabling systems. Avoid sharp bends and excessive pulling force; maintain the recommended bend radius for stranded AWG 26/7 cables. For best performance, keep patch runs short and separate from strong sources of electromagnetic interference when possible.

Usage recommendations

Use this Shielded Cat.6A cable for short, high‑speed links where shielding is required or recommended. For full shield effectiveness, install with shielded terminations and a correctly grounded patching and outlet system. Verify compatibility with your equipment for PoE and 10 Gbit/s operation and inspect connectors for debris or damage before use.