Networking cable MetzConnect Cat.6A 2 m S/FTP (S-STP) RJ-45 to RJ-45 White

MetzConnect Cat.6A 2 m S/FTP (S-STP) RJ-45 to RJ-45 White is a fully shielded Cat6A patch cable designed for high-speed Ethernet connections. The 2 m cable features S/FTP (S-STP) construction with PIMF pairs and AWG 26/7 conductors, LSHF (LSOH) halogen-free sheath and two shielded RJ-45 connectors with gold-plated contacts in a 1:1 assignment. The cable is certified to relevant industry standards for Class EA performance up to 500 MHz and supports 10 Gbit Ethernet, PoE types and HDBaseT, making it suitable for installations that require physical shielding against electromagnetic interference.

Advantages

The fully shielded S/FTP design provides consistent protection against near-end and far-end crosstalk as well as external electromagnetic interference, which helps maintain data integrity in environments with potential noise sources. Gold-plated contacts in the RJ-45 plugs ensure reliable contact resistance and corrosion resistance. The halogen-free sheath reduces toxic gas emission in the event of fire and meets common safety requirements for professional installations. Snagless boots with integrated lever protection minimize strain on the connector latch and reduce the risk of connector damage during installation and maintenance.

Suitable for

• Server racks and data centers requiring shielded cabling
• Switch-to-switch and switch-to-workstation connections in office networks
• 10 Gbit Ethernet links and high-bandwidth segments
• Power-over-Ethernet deployments (PoE, PoE+ and UPoE)
• Audio/video systems using HDBaseT

Key specifications

• Cable category: Cat.6A (Class EA)
• Length: 2 m
• Conductor: AWG 26/7, 4 pairs
• Shielding: S/FTP (overall braid + individually foil-shielded pairs, S‑STP)
• Connector type: RJ-45 to RJ-45, shielded plugs with gold-plated contacts, 1:1 wiring
• Data rate: up to 10 000 Mbit/s
• Frequency: up to 500 MHz
• Cable sheath: LSHF (LSOH), halogen-free
• Standards: ISO/IEC 11801 Ed.2.2 Class EA, IEC 61935-2 test compliance, GHMT certified

How to use

Connect one RJ-45 plug to the network port of a switch, router, patch panel or device and the other plug to the corresponding port on the target device. Ensure that both connected devices and infrastructure support shielded cabling and that protective bonding/grounding is implemented where required to maintain shield effectiveness. Avoid tight kinks or sharp bends in the cable; maintain manufacturer-recommended bend radius and do not exceed tensile loads. The snagless boot protects the latch during insertion and removal, facilitating straightforward handling.

Usage recommendations

For optimal performance, use this Cat.6A S/FTP cable as part of a fully shielded system with proper grounding. Avoid routing alongside high-voltage power lines and maintain separation from sources of strong electromagnetic interference. Verify compatibility with connected equipment for PoE power classes and test links after installation to confirm signal integrity and certification where required.