Network patch cable MetzConnect Cat.6A 5 m, S/FTP (S‑STP), RJ‑45 to RJ‑45, green

MetzConnect Cat.6A patch cable, 5 m long, S/FTP (S‑STP) construction with overall foil and individually shielded twisted pairs. The cable is designed for high-speed 10 Gbit/s Ethernet links and supports Remote Powering standards (PoE, PoE+, UPoE) and HDBaseT. Both ends are fitted with shielded, gold-plated RJ45 male connectors with 1:1 assignment and a snagless boot with integrated lever protection. The halogen-free LSHF sheath reduces toxic gas emissions in case of fire.

Advantages

The fully shielded S/FTP design provides robust protection against electromagnetic interference and crosstalk, making it suitable for environments with high noise or mixed cabling. Certification to Cat.6A and relevant ISO/IEC and IEC standards ensures performance up to 500 MHz for Class EA links and verified compliance via GHMT testing. The cable’s construction (AWG 26/7, PIMF) and shielded RJ45 connectors offer reliable high-speed data transmission and power delivery for modern network equipment.

Suitable for

• 10 GBase-T Ethernet backbones and server room patching
• Connecting switches, patch panels and network outlets in structured cabling
• Environments requiring PoE, PoE+ or UPoE to power devices such as IP cameras and access points
• Installations where additional EMI/RFI protection is needed (industrial or dense cabling areas)

When it may not be suitable

This fully shielded Cat.6A cable may be unnecessary for simple home networks or low-speed applications where Cat5e/Cat6 suffices; using Cat.6A can increase cost and stiffness compared with lower categories. In installations that do not provide proper grounding for cable shields, the benefits of S/FTP shielding may be reduced.

Key specifications

• Length: 5 m
• Cable type: S/FTP (overall foil + individually shielded pairs), PIMF
• Conductor: AWG 26/7 stranded
• Category / Class: Cat.6A / Class EA, performance to 500 MHz
• Data rate: up to 10 000 Mbit/s (10 Gbit/s)
• Connectors: shielded RJ45 male to RJ45 male, gold-plated contacts
• Sheath: LSHF (LSOH), halogen-free
• Boot: snagless with integrated lever protection
• Colour: green (shade may vary between production batches)

How to use

Connect one RJ45 plug to the network device (switch, router or patch panel) and the other plug to the target device or port. Ensure shield continuity by connecting to shielded patch panels or properly grounded equipment where possible. Avoid tight bends and pulling forces exceeding the manufacturer’s recommended limits during installation to maintain signal integrity and cable life.

What to consider before purchase

• Whether Cat.6A performance and shielding are required for your network speed and environment
• Grounding provisions for shielded cabling in your installation
• Required cable length and possible slack for routing and strain relief
• Compatibility of connector type (RJ45) with your network equipment

Usage recommendations

Use this MetzConnect Cat.6A S/FTP patch cable for high‑speed LAN links and PoE deployments where shielding and Cat.6A performance are needed; install with proper grounding and avoid sharp bends to ensure optimal performance.