PoE Injector MicroConnect POEINJ-25W-USBC — Gigabit Ethernet, 25W Output, USB-C

MicroConnect POEINJ-25W-USBC is an indoor PoE injector and PoE-to-USB‑C power converter designed to deliver up to 25 W to Type-C powered devices while simultaneously passing Gigabit Ethernet data. The unit accepts IEEE 802.3 PoE input and provides a Type-C power output with a separate RJ‑45 data port. It supports 10/100/1000 Mbps data rates, fits standard AC 100–240 V supplies and is intended for installations where remote devices such as single-board computers, wireless access points, IP cameras or VoIP phones require USB‑C power but network power is provided via PoE.

Advantages

The device provides a compact and purpose-built solution for converting PoE to USB‑C power while maintaining Gigabit network connectivity. It supplies up to 25 W with automatic voltage negotiation from 5 V to 20 V to match the requirements of connected Type‑C PD devices. Integrated safety protections include overvoltage, overcurrent and short-circuit protection to protect both the injector and the powered device. Its black, lightweight enclosure and standard AC compatibility make it suitable for indoor mounting and simple integration into existing network setups.

Suitable for

• Powering Type-C PD devices from a PoE-enabled network switch or midspan (examples: tablets, small laptops, single-board computers)
• Supplying networked USB‑C devices that require separate power while maintaining Gigabit Ethernet connectivity
• Deployments where running separate power cabling is impractical but PoE is available

Key specifications

• PoE input: IEEE 802.3 PoE compatible
• Data speed: 10/100/1000 Mbps (Gigabit Ethernet)
• Power output: up to 25 W to USB‑C (PD) with voltage negotiation 5 V–20 V
• Ports: 1 PoE input (RJ‑45), 1 RJ‑45 data pass-through, 1 USB‑C power output
• Protections: overvoltage protection (OVP), overcurrent protection (OCP), short-circuit protection (SCP)
• Maximum cable run: up to 100 m over Ethernet cabling
• Power supply compatibility: AC 100–240 V input
• Weight: 0.38 kg
• Colour: Black

How to use

Connect the PoE-enabled Ethernet cable from your switch or midspan to the PoE input port on the injector. Plug a standard Ethernet cable from the RJ‑45 data port to the network interface of the target device if separate data pass-through is required. Connect the USB‑C output to the Type‑C PD device using an appropriate USB‑C cable. Ensure the PoE source provides sufficient power budget and that the target device supports USB‑C PD voltage levels. Power the injector from an AC 100–240 V mains outlet. The unit will negotiate voltage with the connected device and supply up to 25 W while enforcing built-in safety protections.

Usage recommendations

Use standard CAT5e or higher Ethernet cabling and keep cable runs within 100 m for reliable Gigabit performance. Verify the power budget on your PoE switch or midspan before connecting multiple injectors. For devices with higher power requirements than 25 W, choose a higher‑power PoE-to-USB‑C solution. Install the injector indoors in a dry, ventilated location and avoid exposing it to moisture or direct sunlight.