Brush for radiators MODECO MN-71-514 50 mm — radiator/pipe paint brush

The MODECO MN-71-514 radiator brush with a 50 mm working width is designed for painting radiators, pipes and other narrow metal surfaces. Its compact flat shape allows access into tight gaps and between heater fins, enabling controlled application of enamels, radiator paints and heat-resistant coatings. The brush is intended for renovation, maintenance and spot repairs of heating systems where a narrow, precise tool is required.

Advantages

The brush delivers a narrow, even paint stroke while reducing dripping and overspray on adjacent surfaces. Its flat profile and short bristles provide good control when working in confined spaces and along edges. The compact size makes it easy to handle for precision work on pipes, radiator seams and small metal details. Materials and construction are chosen for compatibility with common radiator enamels and heat-resistant paints.

Suitable for

• Applying enamel and radiator paint to metal radiators
• Painting pipes, valves and narrow metal profiles
• Working in tight gaps between radiator fins
• Spot repairs and maintenance of heating systems

Key specifications

• Working width: 50 mm
• Flat brush shape for narrow surfaces
• Short bristles for controlled application
• Suitable for enamels, radiator and heat-resistant paints
• Compact handle for precision work

How to use

Prepare the metal surface by removing loose rust, paint flakes and dirt; degrease and dry thoroughly before painting. Dip the brush lightly into the paint and remove excess on the container rim to avoid drips. Apply paint with steady strokes along the surface, using the flat side of the brush to reach between fins or along pipes. For best coverage, apply thin even coats and allow adequate drying time between layers according to the paint manufacturer's instructions. Clean the brush after use with the solvent or water recommended for the paint type.

Usage recommendations

Use the brush with compatible radiator enamels and heat-resistant coatings. Work in a well-ventilated area and protect surrounding surfaces from splashes. For optimal results on corroded metal, treat the surface with appropriate rust converter or primer before applying the finishing coat.