Solar panel Nedis SOLCH10WT — 3 W, USB Micro-B output 5.3 V 0.5 A, white, 116×169×2.3 mm

The Nedis SOLCH10WT is a compact solar panel delivering 3 W of rated power with an integrated USB Micro‑B output that supplies 5.3 V at up to 0.5 A. Housed in a slim white enclosure measuring 116×169×2.3 mm, this panel is intended to provide portable charging and low-power supply for small devices and electronics. It is compatible with the Nedis battery camera WIFICBO30WT and designed to let you place the camera anywhere within Wi‑Fi range while locating the panel in a sunny spot up to approximately 3 metres away using the included extra-long cable.

Advantages

The panel’s small footprint and low thickness make it easy to mount and integrate into outdoor setups where space is limited. An integrated Micro‑USB B output delivers a defined 5.3 V/0.5 A output for predictable charging behavior of low-power devices. The supplied extra-long cable and flexible mounting options provide installation flexibility, allowing the camera to be positioned in shaded locations while the panel is placed in direct sunlight. Designed for use with the WIFICBO30WT camera, the panel maintains camera operation with intermittent sunlight by topping up the camera’s internal battery during sunny periods.

Suitable for

• Powering Nedis WIFICBO30WT battery camera when installed away from mains power
• Portable charging of small USB Micro‑B capable devices with low current requirements
• Outdoor activities and remote installations where a slim, lightweight solar source is required
• Emergency kits and backup power for low-power network accessories

Key specifications

• Rated output power: 3 W
• Output connector and voltage: USB Micro‑B, 5.3 V
• Maximum output current: 0.5 A
• Colour and material: white slim panel housing
• Panel dimensions: 116 × 169 × 2.3 mm
• Operation type: generates power under direct sunlight only
• Cable: extra-long integrated cable for remote placement (approx. 3 m usable placement)

How to use

Mount the solar panel in a location that receives direct sunlight and route the extra-long cable to the camera or device you wish to power. Connect the Micro‑USB B plug to the device’s corresponding input. For the intended WIFICBO30WT camera, position the camera where required for Wi‑Fi coverage and place the panel up to about 3 metres away in direct sun to maintain battery charge. The panel supplies power only when exposed to direct sunlight; the connected device’s internal battery will provide continued operation during cloudy periods.

Usage recommendations

For best performance, place the panel facing the sun with minimal shading and keep the panel surface clean from dust and debris. Verify the Micro‑USB connector compatibility with the target device before installation. Do not expose the panel to prolonged immersion in water; install it in a sheltered position if exposure to heavy rain is likely.