Network Cable LC/UPC-LC/UPC Multi Mode 50/125 Duplex LSZH Orange 2m

This 2-meter Network Cable LC/UPC-LC/UPC Multi Mode 50/125 Duplex LSZH Orange provides a reliable optical connection for short-range data transmission. The cable uses 50/125 µm multi-mode fiber in a duplex configuration with LC/UPC connectors on both ends, enabling simultaneous transmit and receive channels. Constructed with LSZH (Low Smoke Zero Halogen) jacket material and finished in orange for clear identification, the cable is designed for rack, patch panel and equipment interconnects where safety and easy routing are important.

Advantages

The duplex multi-mode fiber supports high-bandwidth short-reach links while maintaining low insertion loss thanks to precision LC/UPC terminations. The LSZH jacket reduces hazardous smoke and corrosive gases in the event of fire, which is important in enclosed environments. The orange color aids rapid visual identification of multimode runs in mixed-fiber infrastructures, and the 2 m length provides a neat, low-tension connection between nearby ports.

Suitable for

• Interconnecting switches, patch panels and server NICs in data centers and server rooms
• Campus and building backbone segments requiring multimode fiber
• Fiber patching in telecom closets, equipment racks and distribution frames
• Short-reach multimode links for storage area networks (SAN) and video distribution

Key specifications

• Fiber type: Multi-mode 50/125 µm
• Connector type: LC/UPC to LC/UPC duplex
• Length: 2 meters
• Jacket material: LSZH (Low Smoke Zero Halogen)
• Color: Orange
• Configuration: Duplex (two fibers: transmit and receive)

How to use

Route the cable between the two intended LC ports, avoiding sharp bends and excessive tensile stress. Insert each LC connector into the corresponding port until it clicks to ensure proper seating; observe transmit/receive orientation if required by your equipment. For rack or patch-panel installations, secure excess length with appropriate cable management to prevent strain on connectors and maintain bend radius. Before final deployment, verify link continuity and performance with an optical tester suitable for 50/125 µm multimode fiber.

Usage recommendations

Maintain the cable bend radius recommended for multimode 50/125 µm fiber, avoid pulling beyond the specified tensile limits, and keep dust caps on connectors until installation to preserve LC/UPC end-face cleanliness. Use appropriate patch panel labeling to take advantage of the orange color for multimode identification in mixed-fiber environments.