PoE Switch No name CS4010-8ET2GT-110 — 8-port Gigabit with 2x SFP, IEEE 802.3af/at

The PoE Switch No name CS4010-8ET2GT-110 is a managed network switch that provides eight Gigabit Ethernet ports with Power over Ethernet support (IEEE 802.3af/at) and two SFP uplink slots for fiber connectivity. It is designed to deliver both power and data over standard Ethernet cables, enabling simplified cabling and centralized device connectivity for IP cameras, VoIP phones and wireless access points in small to medium deployments. Managed features allow basic network configuration, VLAN segmentation and traffic control while uplink SFP ports provide flexibility for longer-distance or fiber-based links.

Advantages

The switch combines PoE power delivery and Gigabit throughput on all eight ports, permitting simultaneous data and power for connected devices without separate power adaptors. Support for both IEEE 802.3af and 802.3at ensures compatibility with a wide range of powered devices and higher power delivery where required. Two SFP slots provide redundant or long-distance uplink options and the managed functionality enables VLANs, QoS prioritization and basic monitoring for improved network control and traffic optimization.

Suitable for

• Small to medium IP camera systems requiring PoE power and Gigabit bandwidth
• VoIP phone deployments where centralized power and network management are needed
• Wireless access point installations that benefit from PoE and fiber uplink options
• Edge or branch office networks needing managed switching with fiber connectivity

Key specifications

• Ports: 8 x Gigabit Ethernet PoE ports; 2 x SFP uplink slots
• PoE standard: IEEE 802.3af and IEEE 802.3at compatibility
• Data rates: 10/100/1000 Mbps on Ethernet ports
• Management: Managed switch features (VLAN, QoS, basic monitoring)
• Use case: Power and data over Ethernet for cameras, VoIP and access points

How to use

Install the switch in a suitable rack or on a shelf with adequate ventilation and connect the two SFP modules as needed for fiber uplinks. Connect IP cameras, VoIP phones or wireless access points to the Gigabit Ethernet PoE ports using standard Cat5e/Cat6 cables; the switch will supply power automatically to compatible devices. Use the management interface to configure VLANs, QoS and other settings to match your network topology and traffic priorities. When deploying multiple switches, configure uplinks and spanning tree or link aggregation as required by your network design.

Usage recommendations

Use quality Cat5e or Cat6 cables for PoE connections and verify the power requirements of connected devices to ensure the total PoE budget is not exceeded. Place the switch in a ventilated, dust-free environment and plan uplink fiber routes using the SFP slots for longer distances or to connect to a core switch. Regularly review switch firmware and configuration to maintain network security and performance.