Socket outlet Ospel GP-2GRP/m/00, white, 16 A, IP20, 71×71×48 mm

Ospel GP-2GRP/m/00 is a white, single-phase socket outlet designed for standard indoor electrical installations. With a rated current of 16 A and protection class IP20, it is intended for use in dry rooms and domestic environments. The compact dimensions of 71×71×48 mm are compatible with common flush-mounted wall boxes, and the unit uses screw terminals for secure conductor connections. The socket supports typical household loads up to 3520 W at 250 V and provides a basic, reliable point of power connection for everyday devices.

Advantages

The socket offers a compact footprint and simple installation thanks to its standard size and screw terminal design. Its 16 A rating makes it suitable for a wide range of household appliances and small power tools where single-phase power is required. The IP20 protection rating indicates safe use in dry indoor conditions, and the white finish integrates unobtrusively into most interior décors. The product’s straightforward construction facilitates maintenance and replacement when needed.

Suitable for

• Powering household appliances such as vacuum cleaners, kettles, and televisions
• General-purpose indoor sockets in living rooms, bedrooms and corridors
• Small workshops or utility rooms where dry conditions are maintained
• Replacement of existing standard single-phase wall outlets

Key specifications

• Rated current: 16 A
• Rated voltage: 250 V
• Maximum power: 3520 W (at rated voltage)
• Protection class: IP20 — for use in dry indoor environments
• Mounting dimensions: 71 × 71 × 48 mm — compatible with standard flush boxes
• Terminal type: screw terminals for conductor connection

How to use

Install the socket into a standard flush-mounted wall box following national electrical regulations and with the supply disconnected. Secure the unit with the appropriate screws, connect live, neutral and earth conductors to the designated screw terminals, and ensure all connections are tightened to the manufacturer’s recommended torque. After installation, restore power and test the outlet with a suitable tester before connecting appliances. The socket is intended for indoor use only and should not be exposed to moisture.

Usage recommendations

Use the socket only with single-phase circuits that match the rated current and voltage. Avoid connecting appliances that exceed the 16 A rating or continuous loads that approach the maximum power value. For installations in wet or outdoor locations select products with an appropriate higher IP rating. Periodically inspect terminal connections for tightness and signs of wear, and replace the outlet if damage or overheating is detected.