Marker PENTEL MWL5M-E — bullet tip, brown ink, single piece, PVC‑free

PENTEL MWL5M-E is a single-piece brown ink marker with a bullet tip designed for consistent medium-width lines. Supplied as one unit, the marker is suitable for everyday writing, labelling and classroom or office tasks. The ink formulation is PVC-free and does not contain toluene or xylene, offering a reduced exposure to certain solvents while maintaining steady ink flow.

Advantages

The marker’s bullet tip provides a controlled, approximately 3.0 mm line width suitable for clear handwriting and labelling. A pump-action end button supports rejuvenating the ink supply to maintain consistent performance during extended use. The liquid ink is formulated for good visibility on suitable non-porous surfaces and the body incorporates recycled material to reduce environmental impact.

Suitable for

• Writing and labelling on non-porous surfaces such as white or porcelain boards
• Office note-taking and short-term signage
• School tasks, classroom use and teaching aids
• General everyday marking where a medium-width brown line is required

Key specifications

• Tip type: bullet
• Tip size: 6.0 mm (medium) — produces approx. 3.0 mm line width
• Ink colour: brown
• Ink type: vivid liquid ink formulated for non-porous boards
• Body: single-piece construction
• Pump-action end button to restore ink flow
• Removability: ink can be removed from white or porcelain boards with a dry cloth or board eraser
• Materials: made from at least 50% recycled material by weight excluding ink

How to use

Remove the cap before use and press the end button briefly to ensure ink flow if the marker is new or has been unused for some time. Write or label on suitable non-porous surfaces such as white or porcelain boards using the bullet tip to produce medium-width lines. Replace the cap after use to prevent drying and store horizontally or capped at room temperature away from direct heat or sunlight.

Usage recommendations

For best results use on clean, dry whiteboard or porcelain board surfaces and remove marks with a dry cloth or board eraser. If ink flow diminishes, press the end button several times to rejuvenate the ink supply. Do not use on porous paper or fabric for permanent marking; test on a small area if unsure.