PoE adapter PLANET IPOE-176, single-port 802.3bt injector, 95W, blue, 32×87×135 mm

PLANET IPOE-176 PoE adapter is an industrial-grade single-port 10Gbps 802.3bt PoE++ injector that delivers high-speed data and up to 95W of power over a single Ethernet connection. The unit includes two 10/100/1000/2.5G/5G/10GBASE-T RJ45 copper ports (one for data input and one for PoE data and power output), dual 48–54V DC power inputs via terminal block, and a compact metal housing designed for industrial deployments.

Advantages

The IPOE-176 provides up to 95W of power using all four pairs of standard Cat5e/Cat6 cabling according to IEEE 802.3bt, enabling support for high-power devices such as next-generation wireless access points, high-power IP cameras, edge computing units, and digital signage. It features intelligent MCU-controlled FAULT alarm and intuitive LED indicators for PoE mode and real-time power usage, offering reliable status monitoring while reducing false alarms. The device is plug-and-play with a fanless IP30 metal enclosure and supports both end-span and mid-span PoE deployment scenarios.

Suitable for

• Powering Wi‑Fi 7 and other high‑bandwidth wireless access points
• Supplying high‑power outdoor or industrial wireless devices
• Providing power and data to high‑power IP surveillance cameras
• Feeding edge computing devices and digital signage systems
• Industrial and mission‑critical network segments requiring 10Gbps links

Когда он может быть не подходящим

IPOE-176 рассчитан на промышленные и высокопроизводительные установки; он не оптимален для домашних сетей или низкопотребляющих устройств, где 95W PoE не требуется. Также устройство требует двухпроводного питания 48–54V DC через клеммную колодку и корректной инфраструктуры кабельной разводки (кабель Cat5e/Cat6) для достижения заявленных характеристик.

Key specifications

• Data interfaces: 2 × Multi‑Gigabit RJ45 (one data input, one data+PoE output)
• Supported speeds: 10/5/2.5/1/0.1 Gbps
• PoE standard: IEEE 802.3af/at/bt (end-span and mid-span)
• Maximum PoE output: up to 95 W on PoE output port (4‑pair PoE++)
• Power input: dual 48–54V DC terminal block (redundant input supported)
• Cabling distance: up to 100 m for data and PoE
• Enclosure: IP30 slim-type metal housing, fanless
• Operating temperature range: -40 to 75 °C
• Mounting: DIN‑rail and wall mountable
• Protection: 6 kV DC Ethernet ESD protection
• Dimensions (W×D×H): 32 × 87 × 135 mm
• Weight: 0.454 kg

How to use

Install the IPOE-176 on a DIN‑rail or wall mount and connect a 48–54V DC power source to the terminal block inputs. Plug the network uplink into the data input RJ45 port and connect the powered device (PD) to the data+PoE output RJ45 port using standard Cat5e or Cat6 cable. Select the required PoE mode via the PoE mode DIP switch (Standard/Legacy/Force) and monitor the front-panel LEDs for power, FAULT status, Legacy mode, and PoE power usage. No software configuration is required; the unit begins providing power and data once properly connected.

What to consider before purchase

• Ensure connected PDs support 4‑pair PoE++ or require up to 95W of power.
• Verify availability of 48–54V DC power and space for terminal block connection.
• Use Cat5e or Cat6 cabling and keep cable runs within 100 m for reliable PoE delivery.
• Confirm operating temperature range and environmental protection meet installation site conditions.
• Check that a 10Gbps link is required between the uplink and the powered device.

Usage recommendations

For reliable long‑term operation in industrial environments, use certified Cat6 cabling for high‑power PoE++ deployments, enable redundant DC input wiring where possible, and monitor PoE load via the device LEDs to avoid overcommitting available power to multiple PDs.