HDMI splitter PREMIUMCORD khsplit2p 2.1 1-to-2 ports

PREMIUMCORD khsplit2p 2.1 1-to-2 ports is an HDMI splitter that duplicates a single HDMI 2.1 source into two identical HDMI outputs. The device enables simultaneous transmission of high-bandwidth audio and video from one source to two displays, maintaining signal integrity for typical home AV, office presentation, and retail display scenarios. The compact housing and plug-and-play operation make it suitable for simple installations without additional configuration.

Advantages

The splitter supports HDMI 2.1 feature set for higher bandwidth transmission and ensures synchronized output to two displays. Its compact design allows discreet placement near source devices or behind AV furniture. The unit requires no driver installation and works with common HDMI sources and displays, providing a straightforward way to expand a single HDMI output. Built-in signal management helps preserve video and audio quality across both outputs.

Suitable for

• Presentations from a laptop to two projectors or screens
• Home theatre setups where the same signal is required on two displays
• Retail and showroom displays duplicating promotional video to multiple screens
• Conference rooms needing identical output on main and secondary monitors

Key specifications

• Interface: HDMI input to two HDMI outputs
• HDMI standard: HDMI 2.1 compatible for high-bandwidth signals
• Resolution support: up to 4K/120Hz and common lower resolutions (dependent on connected devices and cables)
• Audio support: multi-channel digital audio pass-through
• Power: external power supply required (check included adapter specifications)
• Form factor: compact, lightweight enclosure for easy placement

How to use

Connect the HDMI source device to the splitter input using a high-quality HDMI cable. Attach two HDMI cables from the splitter outputs to the respective displays. Plug in the external power adapter if required and power on the connected devices. The splitter duplicates the incoming HDMI signal to both outputs simultaneously; set the source device’s output resolution and audio format according to the displays’ capabilities. No additional drivers or software configuration is normally needed.

Usage recommendations

Use HDMI cables rated for the intended resolution and refresh rate to ensure full HDMI 2.1 performance. Verify that both displays support the chosen resolution and refresh rate; if there is a mismatch, configure the source device to a common supported setting. Place the splitter in a ventilated area and avoid exposing it to excessive heat or moisture. For long cable runs or complex AV setups, consider signal boosters or certified cables to maintain signal integrity.