Submersible Motor Stand and Dirty Water Pump PRO TPB1102 (MPN YTP013SS)

The Submersible Motor Stand and Dirty Water Pump PRO TPB1102 is a portable submersible pump set designed for removal of contaminated or waste water containing solids and debris. The set combines a submersible motor with a dedicated motor stand that provides stable positioning during operation and simplifies temporary installation directly in basins, sumps, flooded areas or on construction sites. The pump is intended for dewatering tasks where water quality is poor and may contain suspended particles, making it suitable for emergency drainage and routine site maintenance.

Advantages

The integrated motor stand stabilizes the submersible motor and prevents direct contact between the motor housing and uneven surfaces, which reduces wear and increases operational stability. The pump design allows passage of solids and debris without frequent clogging, enabling continuous operation in dirty water conditions. Portability and direct in-liquid installation mean rapid deployment for short-term dewatering and flexible use across locations. The unit is engineered for practical, maintenance-friendly access to the pump and motor components.

Suitable for

• Draining basements and cellars after flooding
• Dewatering construction sites and excavations
• Pumping from sumps, pits and temporary holding tanks
• Removing rainwater and surface water containing debris

Key specifications

• Type: portable submersible dirty water pump with motor stand
• Installation: submersible, direct placement in liquid with stand for stability
• Fluid handled: contaminated or waste water with suspended solids and debris
• Application: temporary dewatering, emergency drainage and site maintenance
• Mobility: designed for easy transport and rapid deployment

How to use

Place the motor stand on a stable surface within the area to be drained, ensuring the stand and pump are fully submerged according to safe operating depth. Mount the submersible motor on the stand so the pump intake is unobstructed and the discharge hose is securely attached. Connect power following local electrical safety regulations and switch on the unit, monitoring operation to ensure solids are passing through and no unusual vibrations occur. After dewatering, switch off power, disconnect the discharge hose, lift the pump from the liquid using appropriate lifting points and inspect the intake and seals for debris before storage.

Usage recommendations

Use appropriate personal protective equipment and follow electrical safety rules when operating the submersible pump. Avoid running the pump dry and inspect the pump intake periodically for large debris that could restrict flow. For prolonged or continuous operation consult product documentation for duty cycle and cooling requirements.