Fire safety cable ProBase PB-1x2x0.8 1×2×0.8 mm Red B2ca 100 m

ProBase PB-1x2x0.8 is a fire safety single-core cable with a conductor configuration of 1×2×0.8 mm and a red outer sheath, supplied on a 100 m roll. Designed for fixed installations that require visible identification and enhanced reaction-to-fire performance, this cable carries a Euroclass B2ca rating for reaction to fire, making it suitable for use in fire alarm circuits, emergency power lines and other safety-related installations where maintaining circuit integrity and clear circuit marking are important.

Advantages

The cable combines a solid single-core conductor with a durable red sheath that provides easy visual identification of safety circuits. The B2ca reaction-to-fire rating indicates limited contribution to fire and reduced generation of heat and smoke compared with lower rated cables. Supplied on a 100 m roll, the product is convenient for medium-length runs and reduces the need for frequent jointing and splicing during installation. The conductor dimensions support standard connectivity options commonly used in alarm and emergency systems.

Suitable for

• Fire alarm and detection circuits
• Emergency lighting and power lines
• Safety and evacuation signalling systems
• Fixed wiring in commercial and public buildings where visible identification is required

Key specifications

• Conductor: single-core, multi-strand allowed by conductor design 1×2×0.8 mm
• Outer sheath colour: red for visible identification
• Reaction to fire: Euroclass B2ca
• Length per roll: 100 m
• Intended use: fixed installation for safety circuits

How to use

Install the cable as part of fixed wiring runs in compliance with local electrical and fire safety regulations. Route the cable along intended pathways, secure at regular intervals with non-combustible or suitably rated clips and avoid sharp bends that could damage the conductor or sheath. Terminate the conductor into compatible connectors or terminal blocks rated for the conductor size and application. Ensure joints and transitions are performed in accessible junctions and, where required, use fire-rated junction boxes or seals to maintain circuit integrity.

Usage recommendations

Verify compatibility with the specific fire safety system and local codes before installation. Store the roll in a dry, ventilated area away from direct sunlight and chemicals. For best results, plan cable routes to minimize exposure to mechanical damage and to reduce the number of joints. Regular inspection and testing of installed safety circuits are recommended to confirm continued functionality.