Repeater Antenna Set Rangeful ANTSET-9C — 9 dBi gain, 360° coverage, All-in-One

Rangeful ANTSET-9C is an all-in-one repeater antenna set designed to work with Rangeful repeaters and other compatible mobile boosters. The kit includes an outdoor antenna, an indoor antenna, two coaxial cables and an adapter, and is intended to transmit and receive mobile signals in urban and suburban areas across distances of several kilometres. With a supported frequency range of 700–2700 MHz and overall gain values around 9 dBi, the set supports GSM, 3G and 4G LTE networks and provides even radial coverage for improved reception indoors and outdoors.

Advantages

The ANTSET-9C combines a weatherproof outdoor antenna with a compact indoor antenna and pre‑cut coaxial cables for minimal signal loss and easy installation. The outdoor AY9C antenna offers up to 9.5 dBi gain and a wide operating bandwidth thanks to its log‑periodic design, while the indoor AIP8C provides 7–9 dBi gain to distribute the boosted signal inside buildings. An SMA(f) to N(m) adapter ensures compatibility with boosters that use N connectors and helps simplify through‑wall or roof cable routing.

Suitable for

• Small and medium office buildings
• Residential houses and multi‑family buildings
• Warehouses, workshops and retail locations
• Fuel stations and remote commercial sites

Key specifications

• Model: ANTSET-9C (Rangeful)
• Frequency range: 700–2700 MHz
• Outdoor antenna: AY9C, log‑periodic, up to 9.5 dBi gain, dimensions 30 x 21 x 6.5 cm
• Indoor antenna: AIP8C, indoor use, 7–9 dBi gain, includes wall mount
• Cables: 10 m coaxial cable (outdoor to repeater), 5 m coaxial cable (repeater to indoor antenna)
• Connector adapter: SMA(f) to N(m)
• Coverage: omnidirectional / 360° radial distribution

How to use

Mount the weatherproof outdoor AY9C antenna on a mast or rooftop where it has clear line of sight toward the nearest operator base stations. Connect the outdoor antenna to the repeater or mobile booster using the supplied 10 m coaxial cable and the SMA-to-N adapter as required by the booster’s connector. Place the repeater inside the building and connect the 5 m cable from the repeater to the indoor AIP8C antenna, mounting the indoor antenna on a wall in the area where improved coverage is needed. Verify connector tightness and route cables to minimize bends and avoid sharp kinks for lowest signal attenuation.

Usage recommendations

For best performance, position the outdoor antenna with a clear view of the operator’s base stations and keep a safe separation between the outdoor and indoor antennas to prevent oscillation. Use the supplied mounting hardware and ensure all weather seals are intact on outdoor connections.