Coaxial UHF Cable Rangeful HF240 50 Ω, 0.5 m

Rangeful HF240 50 Ω coaxial UHF cable, 0.5 m length, provides a short, standardized RF connection for UHF equipment and antenna systems. The cable is intended for low-loss transmission over short distances where a compact, shielded link is needed between radios, routers, antenna connectors and test equipment. Its physical size and impedance match common UHF devices to ensure consistent signal transfer in installations and temporary setups.

Advantages

The coaxial construction offers shielding that reduces external interference and preserves signal integrity over the short run. The 50 Ω impedance ensures compatibility with standard UHF radio and RF equipment, while the 0.5 m length minimizes attenuation and signal reflections in tight connection scenarios. Mechanical connectors provide a consistent mating interface for reliable and repeatable connections during use and maintenance.

Suitable for

• Connecting UHF radios and transceivers to external antennas
• Short interconnects between routers, gateways and RF modules
• Temporary test setups and measurement connections in labs or fieldwork
• Compact installations where a low-loss, shielded cable is required

Key specifications

• Characteristic impedance: 50 Ω
• Length: 0.5 m
• Cable type: coaxial UHF
• Typical use: RF signal and antenna connections
• Construction: shielded coaxial conductor for reduced interference

How to use

Align the cable connectors with the mating UHF sockets on the devices, then engage the connector according to the connector type until a secure mechanical fit is achieved. Use the shortest practical cable routing to reduce unnecessary loss and avoid sharp bends or kinks that could damage the inner conductor or shield. When installing between permanently mounted equipment, verify torque recommendations for the connector if specified by the mating device to ensure proper electrical contact without over-tightening.

Usage recommendations

Store the cable coiled without tight bends and avoid exposure to prolonged moisture or direct sunlight. For consistent RF performance, inspect connectors for corrosion or debris before use and replace the cable if physical damage to the jacket or connectors is visible.