Coaxial cable Rangeful HF240 RP-SMA male to RP-SMA female, 10 m

Coaxial cable Rangeful HF240 with RP‑SMA male to RP‑SMA female connectors, 10 m long, is a flexible RF extension cable intended for signal connections between devices that use RP‑SMA ports. The cable provides a continuous 10 meter length for indoor or short-distance outdoor routing and is suitable for extending antenna connections, linking routers and repeaters, or creating temporary test setups. The construction balances flexibility and signal integrity for common 2.4 GHz and 5 GHz Wi‑Fi applications and other RF uses within the cable's frequency capability.

Advantages

The cable features RP‑SMA male to RP‑SMA female terminations that allow compatibility with devices using reverse polarity SMA connectors without requiring adapters. A 10 m length gives extended reach for placement of external antennas or relocation of network equipment while maintaining a single continuous coaxial run. The HF240 jacket and conductor design deliver predictable attenuation and mechanical flexibility, facilitating easy routing around obstacles in indoor environments and short outdoor runs where a longer cable is not practical.

Suitable for

• Extending Wi‑Fi antenna connections (2.4 GHz / 5 GHz)
• Connecting routers, access points and repeaters to external antennas
• RF test setups and temporary measurement configurations
• Short-distance outdoor antenna placement where low-loss and flexibility are needed

Key specifications

• Cable type: coaxial HF240 construction
• Connector A: RP‑SMA male
• Connector B: RP‑SMA female
• Length: 10 meters (continuous)
• Typical use: RF signal transmission for Wi‑Fi and similar systems
• Flexibility: designed for easy bending and routing in indoor installations

How to use

Connect the RP‑SMA male end to the RP‑SMA female port of the transmitting device or antenna feed, and attach the RP‑SMA female end to the receiving device's RP‑SMA male port, observing correct thread engagement without over‑tightening. Route the cable to avoid sharp bends and tight kinks; maintain manufacturer‑recommended minimum bend radius when possible. Use appropriate cable clamps or ties to secure runs indoors and protect the cable from abrasion or compression at mounting points. If used outdoors for short runs, avoid prolonged direct exposure to harsh weather and UV without additional protective covering.

Usage recommendations

For best performance, keep the cable length as short as practical for the installation, avoid coiling tightly, and ensure connectors are clean and secure. When connecting critical antenna systems, verify insertion loss and SWR in the actual setup and consider using a lower‑loss cable or placing the antenna closer to the device if measurable signal degradation occurs.