Coaxial cable N male to N female Rangeful HF400 Flexible 20m 50 Ω

Rangeful HF400 Flexible coaxial cable with N male to N female connectors is a 20-meter, 50 Ω RF cable designed for signal transmission between N-type devices. The cable combines a flexible HF400 construction with standard N connectors to provide a practical interconnect for antennas, test equipment and field installations where a longer, manageable run is required.

Advantages

This coaxial cable offers a balance of flexibility and electrical performance, making it easier to route in confined spaces while maintaining characteristic impedance of 50 ohms for consistent RF matching. The N male to N female termination provides robust mechanical connection and secure mating to a wide range of RF equipment. The 20 m length covers medium-distance interconnect needs without excessive signal loss for many common RF applications.

Suitable for

• Connecting antennas to transceivers or amplifiers
• Linking test and measurement instruments in labs or field testing
• Temporary or permanent runs in RF installations and deployments
• Interconnecting N-type ports on repeaters, filters and combiners

Key specifications

• Cable type: HF400 flexible coaxial
• Connector configuration: N male to N female
• Length: 20 m
• Impedance: 50 Ω
• Application: RF signal transmission and interconnects

How to use

Connect the N male connector to the female N port on the transmitting or measurement device and attach the N female connector to the receiving device or antenna feed. Ensure connectors are clean and free of debris before mating, and hand-tighten until secure; use a torque wrench only if specified by the equipment manufacturer. Route the cable to avoid sharp bends, kinks or crushing and secure with non-compressive straps where necessary. For alternating use in different setups, inspect connectors regularly for wear and maintain protective caps when connectors are not in use.

Usage recommendations

For optimal performance, avoid bending the cable below its minimum bend radius and keep cable runs as short as practical for the frequency in use. When used at higher frequencies or longer runs, verify insertion loss against system requirements; consider using additional amplification or a lower-loss cable if necessary. Store coiled loosely and protect connector ends to preserve integrity.