Coaxial cable Rangeful HF400-RPTNCM-NM-3 — 3 m, N Male to RP-TNC Male, HF400 UltraFlex

This Rangeful coaxial cable HF400-RPTNCM-NM-3 is a 3 m RF jumper with an N male connector on one end and an RP-TNC male connector on the other, assembled on HF400 UltraFlex dielectric. The cable is designed to provide a flexible, low-loss RF link for antenna, radio and test equipment connections. Its construction allows reliable signal transfer and straightforward routing in confined or equipment-dense installations.

Advantages

The HF400 UltraFlex dielectric construction reduces bending resistance while maintaining low insertion loss across common RF frequency ranges. Using an N male to RP-TNC male termination offers secure mechanical connection and compatibility with a wide range of outdoor and indoor radio equipment. The 3 m length balances reach and manageable cable handling, and the cable's flexibility supports tight bend radii without compromising shielding effectiveness.

Подходит для

• Antenna connections
• Radio transceivers and base stations
• Laboratory and field test setups
• Cable routing in racks and constrained spaces

Key specifications

• Cable type: coaxial RF jumper with HF400 UltraFlex dielectric
• Length: 3 m
• Connectors: N male to RP-TNC male
• Characteristic impedance: 50 Ω
• Design focus: low insertion loss, high flexibility
• Typical use: antenna and radio equipment interconnects

How to use

Connect the N male end to equipment or antenna ports accepting N female connectors and the RP-TNC male end to devices with RP-TNC female receptacles. Ensure connectors are aligned and threaded carefully to avoid cross-threading; hand-tighten then secure with appropriate torque if required by the connected device. Route the cable to avoid sharp kinks, excessive tension, or tight wrap-around small-diameter objects; maintain recommended bend radius for HF400-type cables to preserve performance. Inspect connector interfaces for contaminants before mating.

Usage recommendations

Use the cable within the operating frequency and power limits of the connected equipment, avoid exposure to prolonged UV or chemical agents that may degrade the jacket, and store coiled with gentle loops to prevent permanent deformation. For outdoor or permanent installations, consider additional environmental protection or waterproofing at connector interfaces.