Coaxial cable Rangeful HF400 TNC male–TNC male, 50 Ω, full copper, 15 m

Rangeful HF400 coaxial cable with TNC male to TNC male connectors is a 15 m, 50 Ω RF cable with full-copper conductors designed for signal transmission in wireless systems, test equipment and antenna connections. The cable combines a robust HF400 dielectric and copper shielding with TNC terminations to provide a reliable connection for applications that require a 50 ohm impedance and threaded TNC mating.

Advantages

The full-copper center conductor and copper shielding reduce insertion loss and improve conductivity compared with plated alternatives, supporting clearer RF transmission across the 15 m length. TNC male connectors provide a secure, threaded connection that is resistant to vibration and suitable for higher-frequency applications where consistent impedance matching is important. The HF400 construction balances flexibility and mechanical strength to allow easier routing in installations while maintaining stable electrical performance.

Suitable for

• Connecting RF test instruments and signal generators to devices
• Linking antennas and transceivers in wireless installations
• Laboratory and bench setups that require a 15 m, 50 Ω cable
• Temporary or permanent cabling for RF measurement and diagnostics

Key specifications

• Impedance: 50 Ω
• Length: 15 m
• Center conductor: full copper
• Connector type: TNC male – TNC male
• Cable construction: HF400 dielectric with copper shielding
• Typical use: RF signal transmission, antenna feed, test equipment cabling

How to use

Inspect both TNC connectors and mating ports for damage or debris before making connections. Align and thread each TNC male connector by hand until snug; avoid over-tightening to prevent connector or equipment damage. Route the 15 m cable to minimize sharp bends and kinks, keeping bend radius above the manufacturer-recommended minimum where possible. For test and measurement setups, connect the cable to the instrument and the device under test, then verify signal levels and match using appropriate RF measurement tools.

Usage recommendations

Store the cable coiled without tight loops, protect connectors with dust caps when not in use, and avoid exposure to prolonged moisture or corrosive environments. For critical measurement work, periodically inspect the copper conductor and shield continuity and replace the cable if mechanical wear or increased loss is observed.