Coaxial cable Rangeful RP-TNC female to RP-TNC female RG58 50 Ω 15 m

Rangeful coaxial cable RP-TNC female to RP-TNC female RG58 50 Ω 15 m is a 15-metre RF interconnect built on RG58 construction with nominal 50 ohm impedance. The cable features RP-TNC female connectors at both ends for use with equipment and antennas that accept reverse-polarity TNC terminations. The flexible RG58 core supports RF signal transfer across a broad range of low- to mid-frequency radio applications while allowing straightforward routing in installations and test arrangements.

Advantages

The cable combines a standard RG58 coaxial dielectric and shielding with RP-TNC female terminations to provide consistent impedance matching and reduced signal reflection. Its 15 m length supplies extended reach between radio units, antennas and measurement devices without intermediate adapters. Flexibility in the jacket material facilitates installation in confined or curved pathways, and the threaded RP-TNC connectors ensure a stable mechanical and electrical connection when mated with compatible RP-TNC male counterparts.

Suitable for

• Connecting antennas to radio transceivers and routers with RP-TNC interfaces
• Test and measurement setups in labs and workshops requiring 50 Ω cabling
• Temporary or permanent RF installations where a 15 m run is required
• Amateur radio, scanning receivers and Wi‑Fi devices using RP-TNC connections

Key specifications

• Cable type: RG58 coaxial
• Impedance: 50 Ω nominal
• Connector type: RP-TNC female at both ends
• Length: 15 metres
• Jacket: flexible outer sheath suitable for indoor routing (non-armoured)

How to use

Align the RP-TNC female connectors with the mating RP-TNC male devices and rotate the threaded coupling nut until fingers-tight; avoid excessive torque to prevent damage to the connector body. Route the 15 m cable to minimize sharp bends and avoid tight loops that could stress the dielectric or shielding. For measurement tasks, keep cable runs as short as practical and use the full-length cable only when required to reduce system insertion loss. Inspect connector contacts before connection to ensure cleanliness and remove any debris.

Usage recommendations

Use this RG58 RP-TNC female to RP-TNC female cable for indoor RF links and lab setups; if the installation will be exposed to harsh outdoor conditions or requires very low loss at higher frequencies, consider a weatherproof or lower-loss cable alternative. Store coiled loosely and avoid repeated tight bending to prolong service life.