Patch Cable RB-LAN CAT5e 2x 90° Angled U/UTP RJ-45 to RJ-45, 0.25 m, black

Patch Cable RB-LAN CAT5e 2x 90° Angled U/UTP RJ-45 to RJ-45, 0.25 m, black is a short Cat5e patch cable designed for compact installations. The cable has two 90° angled RJ-45 plugs and an unshielded U/UTP construction. Gold-plated contacts and high-quality inner conductors provide reliable signal transfer for Ethernet connections. With a length of 0.25 m and a low-profile angled design, this cable is intended for tight spaces behind switches, patch panels, wall outlets and network equipment.

Advantages

The angled RJ-45 plugs reduce strain and enable neat routing in confined spaces where straight connectors would protrude. Unshielded Cat5e construction supports standard Ethernet performance up to Gigabit speeds while keeping the cable flexible and easy to handle. Gold-plated contacts improve contact reliability and corrosion resistance. A sturdy PVC jacket and integrated bend protection help protect the conductor assembly from mechanical stress during installation and daily use.

Suitable for

• Connecting switches, routers and patch panels in cramped rack or cabinet environments
• Short link connections behind wall outlets and surface-mounted network sockets
• Linking devices where a low-profile, right-angle plug prevents cable obstruction
• Temporary or permanent short-distance Ethernet connections in home or small office setups

Key specifications

• Category: Cat5e, U/UTP (unshielded)
• Connector type: RJ-45 to RJ-45 with two 90° angled plugs
• Contact plating: gold-plated contacts for improved contact reliability
• Conductor type: high-quality inner conductors (copper-clad construction)
• Suitable data rates: supports Ethernet up to 10/100/1000 Mbit/s
• Cable length: 0.25 m
• Jacket material: PVC with bend protection
• Colour: black
• Pair sequence: wired to EIA/TIA 568B standard

How to use

Insert each angled RJ-45 plug into the corresponding network port until the connector clicks into place or seats firmly. Use the short 0.25 m length where device ports are close together or where excess cable would interfere with adjacent equipment. Ensure connectors align with port orientation before applying pressure to avoid damaging the plug or port. To remove the cable, depress the latch (if present on the device side) and gently pull the connector out while supporting the plug body.

Usage recommendations

For reliable performance, avoid sharp bends near the connector and do not subject the cable to repeated heavy twisting or crushing forces. Use this short Cat5e patch cable for connections where minimal cable slack is required; for longer runs, choose an appropriately rated Cat5e or higher category cable. Keep the cable away from strong electromagnetic interference sources for optimal signal integrity.