Patchcord UTP RBLINE Cat.6e 8-conductor CCA cable, RJ45 plug-to-plug, 3.0 m, green

RBLINE Patchcord UTP Cat.6e is a patch cable with eight conductors and CCA (copper-clad aluminum) construction, terminated both ends with RJ45 plug-to-plug connectors. With a 3.0 m length and green jacket, this cable is designed to connect Ethernet devices, patch panels, switches and routers in home and small office networks where Cat.6e performance and cost-effective CCA wiring are acceptable. The UTP design omits overall shielding to keep flexibility and reduce weight while supporting typical Ethernet applications over short to medium distances.

Advantages

The cable provides straightforward plug-and-play connectivity with standard RJ45 connectors compatible with common network equipment. CCA conductors offer a lower-cost alternative to solid copper cables while maintaining adequate electrical conductivity for many Ethernet uses. The 3.0 m length covers typical desk-to-switch or patch panel runs without excess slack, and the colored jacket simplifies visual identification within cable bundles or racks.

Suitable for

• Connecting desktop computers, printers and IP phones to network switches
• Patching between wall outlets and switch ports in home and small office setups
• Temporary cabling, test setups and lab environments
• Color-coded cable management in cabinets and patch panels

Key specifications

• Cable category: UTP Cat.6e
• Conductor configuration: 8 conductors, twisted pairs
• Conductor material: copper-clad aluminum (CCA)
• Connector type: RJ45 plug-to-plug
• Length: 3.0 m
• Jacket color: green
• Shielding: unshielded (UTP)
• Typical use: Ethernet data cabling (LAN)

How to use

Insert the RJ45 plugs into the corresponding Ethernet ports on devices, switches or patch panels until they click to ensure a secure connection. Route the cable to avoid tight bends, sharp edges and areas of potential mechanical stress. For structured cabling installations, run the patchcord between wall outlets and patch panels or from a patch panel to a switch port. When disconnecting, press the plug latch and pull straight out to avoid damaging the connector.

Usage recommendations

Use this Cat.6e CCA patchcord for typical LAN connections where cost-effectiveness and flexibility are priorities; avoid using CCA cables in installations that require certified pure-copper cabling for PoE delivery at higher wattages or for long-distance runs where signal loss may be critical.