Rittal socket-outlet 2482.600 Black Translucent IP65 100–240V 16A 50/60Hz Polycarbonate

The Rittal socket-outlet 2482.600 is a polycarbonate, translucent black socket module designed for installation in enclosures and control cabinets where IP65 protection against dust and water is required. Rated for 100–240 V, 16 A and 50/60 Hz, the unit provides two socket outlets in a compact housing with a flip-top lid and is prepared for the installation of standard 2-pole RCBO or residual-current protective devices according to EN 60204-1 requirements for socket outlets in or on machine enclosures.

Advantages

The housing is molded from durable polycarbonate that combines impact resistance with stable electrical insulation properties while the translucent black finish allows visual inspection without opening the lid. IP65 protection ensures the module resists dust ingress and low-pressure water jets when mounted correctly, and the flip-top lid helps protect unused sockets from contaminants. Prepared mounting for standard 2-pole RCBOs and compliance considerations with EN 60204-1 simplify safe integration into machinery and control panels.

Suitable for

• Providing power to tools and small equipment inside industrial enclosures and control cabinets
• Outdoor-protected installations where splash and dust protection is required
• Machine enclosures where sockets must be protected and RCBO residual-current protection is used

When it may not be suitable

This socket-outlet is not intended for permanent outdoor exposure without suitable additional enclosure protection; IP65 protects against dust and water jets but does not permit submersion. It is rated to 16 A and therefore should not be used for circuits or equipment that require higher continuous current ratings.

Key specifications

• Voltage rating: 100–240 V AC
• Current rating: 16 A
• Frequency: 50/60 Hz
• Number of sockets: 2
• Housing material: Polycarbonate (plastic)
• Colour / finish: Translucent black
• Ingress protection: IP65 (when mounted and closed)
• Protection features: Flip-top lid

How to use

Install the module into the designated cut-out of an enclosure or control cabinet following the manufacturer’s mounting instructions and local electrical regulations. Fit the required 2-pole RCBO or residual-current protective device if residual-current protection is needed according to EN 60204-1, and connect supply conductors to the terminal points rated for the stated voltage and current. Ensure the lid is closed to maintain IP65 protection when the sockets are not in use and inspect seals and mounting interfaces periodically for wear or damage.

What to consider before purchase

• Verify that the 16 A current rating and 100–240 V voltage range match the intended equipment and circuit capacity
• Confirm the enclosure cut-out dimensions and mounting compatibility with your control cabinet or panel
• Ensure that residual-current protection (RCBO or equivalent) is installed where required by EN 60204-1 for machine sockets
• Consider whether IP65 ingress protection is adequate for the planned environment or if higher protection or additional enclosure measures are needed

Usage recommendations

Use the socket-outlet for equipment within the specified ratings, keep the flip-top lid closed when not in use, and pair the module with appropriate residual-current protection and correct cable sizes to maintain safety and conformity with EN 60204-1.