Patch cord ROLINE Cat.5e FTP (F/UTP), RJ-45 to RJ-45, 3 m, black

ROLINE Cat.5e FTP patch cord, 3 m, black, is a shielded RJ-45 to RJ-45 cable designed for Ethernet networks that require reduced electromagnetic interference. The cable uses F/UTP (foil-shielded twisted pair) construction with four stranded copper pairs and screened RJ-45 plugs on both ends. Molded kink protection and a flexible sheath make it suitable for installations where narrow bending radii are required, while gold-plated contacts ensure reliable signal transfer and corrosion resistance. The connector pinout follows the EIA/TIA-568 1:1 contact assignment for straightforward network device interconnection.

Advantages

The FTP shielding with aluminium-clad polyester foil provides improved protection against external EMI compared to unshielded cables, helping to preserve signal integrity in electrically noisy environments. Stranded copper conductors combined with flexible insulation deliver a balance of performance and manageability for patching applications. Molded strain relief reduces the risk of cable damage at the connector, and gold-plated contacts ensure low contact resistance and long-term durability. The cable is manufactured to Cat5e performance parameters suitable for standard Ethernet speeds.

Suitable for

• Connecting switches, routers and network devices in office and home LANs
• Patching between wall outlets and patch panels in structured cabling
• Temporary or permanent links in wiring closets and network racks
• Environments with moderate electromagnetic interference where foil shielding is beneficial

Key specifications

• Cable category: Cat.5e (FTP / F/UTP)
• Length: 3 m
• Connectors: RJ-45 to RJ-45, screened plugs
• Conductor: 4-pair stranded copper
• Shielding: aluminium-clad polyester foil (full pair shielding)
• Contact plating: gold-plated contacts
• Molded strain relief for improved durability
• Contact assignment: 1:1 (EIA/TIA-568)
• Color: black

How to use

Connect one RJ-45 end to a network device such as a switch, router, patch panel or computer and the other end to the corresponding port on the peer device. Ensure connectors are fully inserted until the latch engages and verify link/activity LEDs on the connected devices to confirm a functioning connection. When routing the cable through tight spaces, avoid sharp bends and maintain the molded kink protection at connector ends. For shielded installations, ensure proper grounding of patch panels and equipment chassis to take full advantage of the FTP shielding.

Usage recommendations

Use this Cat.5e FTP patch cord for short to medium-length Ethernet links up to 3 m where foil shielding will reduce interference. For permanent horizontal cabling runs or environments requiring higher bandwidth, consider using higher category cabling (Cat6/Cat6A) as appropriate. Maintain bend radius greater than the cable diameter and avoid compressing the cable under heavy objects to preserve performance.