Insulation EPS board ROTH 10000x1000x30 mm (10 m² per pallet)

ROTH Expanded Polystyrene (EPS) insulation board, size 10000 x 1000 x 30 mm supplied as 10 m² per pallet, is a thin-profile thermal insulation panel intended for use in construction and renovation. The product offers a lightweight, moisture-resistant layer that reduces heat transfer in walls, floors and roofs where a low-thickness insulation solution is required. Manufactured from closed-cell EPS, the board provides stable thermal performance and easy handling on site.

Advantages

The EPS board combines low weight with consistent thermal resistance, enabling simpler transport and faster installation compared with heavier insulation materials. Its closed-cell structure gives good moisture resistance and reduced water absorption, which helps maintain insulating properties over time. The large panel dimensions minimize joints and cutting time, while the thin 30 mm profile is suitable for projects with limited cavity depth or where minimal buildup is necessary.

Suitable for

• Thermal insulation of interior and exterior walls where thin layers are required
• Underfloor insulation in renovation projects with limited screed depth
• Flat or pitched roof insulation as an additional thermal layer
• Insulation in partition walls and lightweight constructions

Key specifications

• Material: expanded polystyrene (EPS)
• Panel dimensions: 10000 mm x 1000 mm x 30 mm
• Pack format: 10 m² supplied per pallet
• Density class: typical for EPS building boards (closed-cell structure)
• Thermal behavior: low thermal conductivity suitable for thin-layer insulation
• Moisture performance: low water absorption compared with open-cell materials
• Weight: lightweight and easy to handle on site

How to use

Measure and cut the ROTH EPS board to the required dimensions using a fine-toothed saw or a hot-wire cutter to achieve clean edges. Install panels with staggered joints where possible and fill gaps with compatible insulation or sealant to reduce thermal bridging. For wall installations, fix boards mechanically or with appropriate adhesive following substrate preparation and manufacturers' instructions. For floor use, place boards on a leveled subbase and ensure they are protected from mechanical damage before laying screed or final floor finish. For roof applications, install boards in accordance with roofing system requirements, ensuring proper vapor control and drainage where necessary.

Usage recommendations

Store boards flat and protected from prolonged UV exposure and direct contact with solvents or petroleum products. Avoid installing insulation directly against heat sources or exposed flames. For best performance, combine the EPS board with appropriate membranes, vapour barriers and finish layers suited to the specific construction application.