Patch Cable S-Conn Cat 8.1 F/FTP double-shielded halogen-free 2000 MHz — 10.0 m

S-Conn Cat 8.1 patch cable, F/FTP double-shielded and halogen-free, rated to 2000 MHz and supplied in white. This 10.0 m Ethernet patch lead is designed for high-frequency data transmission in LAN and data centre environments, offering reduced crosstalk and electromagnetic interference for demanding 25/40 Gbps applications while remaining compatible with lower-category networks and cabling standards.

Advantages

The cable combines a foil shield for each pair with an overall braided or foil screen to provide double shielding (F/FTP), which lowers alien and near-end crosstalk and improves signal integrity at very high frequencies up to 2000 MHz. The halogen-free jacket reduces the release of corrosive gases in the event of fire, making it suitable for installations with stricter safety requirements. At 10.0 m length the patch lead is long enough for many rack-to-rack or cabinet-to-cabinet connections while keeping flexibility and manageable cable routing.

Suitable for

• High-speed LAN backbone and data centre switch interconnects
• 25 Gbps and 40 Gbps server and switch links where Cat8.1 electrical performance is required
• Environments with elevated electromagnetic interference where additional shielding is beneficial
• Structured cabling segments requiring halogen-free materials for safety compliance

When it may not be suitable

This Cat 8.1 F/FTP cable is optimized for short-range, high-frequency copper connections and may be unnecessary for basic home networks or applications that do not require multi-gigabit throughput. For very long-distance links, fibre-optic cabling is typically more appropriate due to lower attenuation and longer reach.

Key specifications

• Cable category: Cat 8.1
• Shielding type: F/FTP (overall foil + foil per pair) — double-shielded
• Frequency rating: up to 2000 MHz
• Typical supported data rates: designed for 25/40 Gbps applications; backward compatible with lower categories
• Length: 10.0 m
• Conductor and pair configuration: four twisted pairs (AWG and conductor material per standard Cat 8.1)
• Jacket: halogen-free material
• Colour: white

How to use

Use this S-Conn Cat 8.1 patch cable to connect Ethernet ports between switches, patch panels, and servers within racks and cabinets. Ensure connectors on both ends are seated firmly and that cable routing avoids sharp bends, excessive compression, and sources of mechanical strain. Maintain recommended bend radius for Cat 8.1 cabling during installation to preserve shielding and pair geometry. For best performance, keep the cable runs within the intended short-reach scope of Cat 8.1 and avoid mixing with unshielded cabling in the same conduit without proper grounding.

What to consider before purchase

• Required data rate and whether 25/40 Gbps capability is needed
• Length: verify that 10.0 m meets rack or patch panel distance requirements
• Compatibility with existing connectors and whether shielded terminations and grounding are in place
• Installation environment and need for halogen-free jacket for safety or regulatory reasons

Usage recommendations

For optimal performance, use shielded ports and maintain proper grounding of the cabling system; avoid sharp bends and secure the cable to prevent movement. When integrating into mixed-cabling environments, keep shielded and unshielded cables separated or use separate pathways to reduce interference risks.