Patch Cable S-Conn Cat6 S/FTP double-shielded angled-to-straight, white, 3 m

S-Conn Cat6 S/FTP patch cable, 3 m, white, with an angled connector at one end and a straight connector at the other. The cable uses S/FTP construction (screened foiled twisted pair) with double shielding around each pair and an overall braid, designed for Gigabit Ethernet and other high-speed network links. Its construction reduces crosstalk and external electromagnetic interference, making it suitable for reliable patching between network switches, routers, patch panels and wall outlets in home, office or data‑cabinet environments.

Advantages

The double-shielded S/FTP design provides improved protection against alien crosstalk and external EMI compared with unshielded cables, supporting stable high-speed data transmission. The angled-to-straight connector combination helps with space-constrained installations by reducing strain and allowing neat routing where horizontal ports or tight panels would otherwise block straight plugs. The 3 m length offers a practical reach for typical desk-to-wall or rack-to-patch-panel connections while the white jacket keeps visible cable runs discreet.

Suitable for

• Gigabit Ethernet (1000BASE-T) and Fast Ethernet connections
• Patch cabling between switches, routers, patch panels and wall outlets
• Office desks, meeting rooms and small server cabinets where space is limited
• Environments with moderate electromagnetic interference where shielding is beneficial

When it may not be suitable

This Cat6 S/FTP cable is intended for horizontal patching and short permanent links up to its 3 m length; it is not suitable for long-distance backbone runs that require fiber or higher-category copper cabling. In installations where device ports or cable management require two straight connectors or both angled ends, the angled-to-straight configuration may not match the needed orientation.

Key specifications

• Category: Cat6 (suitable for Gigabit Ethernet)
• Shielding: S/FTP — foil around each twisted pair plus overall braid (double shielding)
• Connector configuration: angled (90°) at one end, straight at the other
• Length: 3 m
• Color: white
• Suitable conductor type: solid/stranded copper cores for patching (industry standard)

How to use

Connect the angled end to devices or wall outlets where a low-profile entry is required and the straight end to switches, routers or patch panels. Ensure connectors are fully inserted until a click is felt for reliable contact. Route the cable to avoid tight bends and excessive tension; maintain the bend radius recommended for Cat6 cables and keep the cable separate from heavy power lines to minimize interference. For rack installations, use cable management panels or ties to secure the cable and prevent strain on the connectors.

What to consider before purchase

• Verify port orientation at both connection points to confirm angled-to-straight configuration fits the installation.
• Confirm 3 m length is sufficient for the intended run with some allowance for routing and strain relief.
• Assess whether shielding is necessary for your environment; S/FTP is beneficial where EMI or crosstalk is a concern.

Usage recommendations

For best performance, avoid sharp bends and keep the cable away from high-voltage power lines. Use the angled end toward tight wall outlets or back-of-desk ports and the straight end to connect equipment in racks or switch panels.