S-Conn Slim Patch Cable Flat Cable Cat.6A with Cat.7 Raw Cable U/FTP black 0.25 m

The S-Conn Slim Patch Cable Flat Cable Cat.6A with Cat.7 Raw Cable U/FTP black 0.25 m is a short, flat network patch lead designed for confined spaces and neat cable routing. Combining Cat.6A termination with a Cat.7-grade U/FTP raw cable construction, this 0.25 m black patch cable provides high-frequency shielding and pair-level foil to maintain signal integrity for high-speed Ethernet links while minimising cable bulk in racks, patch panels and desktop setups.

Advantages

This flat slim patch cable offers a low-profile form factor for tight cable channels and close-proximity ports. The U/FTP construction (overall braid absent, each pair foil-shielded) reduces crosstalk and external interference compared with unshielded cable, helping to sustain Cat6A-level performance for 10 Gbps applications over short distances. The short 0.25 m length reduces cable slack and improves tidiness behind equipment or within patch panels.

Suitable for

• Short-distance connections between patch panel ports and network switches
• Workstation links where minimal cable bulk is required
• Rack and cabinet cable routing with limited space
• Environments requiring improved protection against electromagnetic interference

When it may not be suitable

This 0.25 m flat patch cable is intended for very short interconnects; it is not suitable where longer runs are needed. Because the cable uses U/FTP shielding and slim construction, it may be less flexible than some unshielded flat cables in extremely tight bends, and it is not a replacement for full-length Cat7 installations where longer-distance Cat7-rated performance is specifically required.

Key specifications

• Cable category: terminated for Cat6A performance using Cat.7 U/FTP raw cable construction
• Shielding: U/FTP — each twisted pair foil-shielded
• Length: 0.25 m
• Form factor: flat / slim design for low profile routing
• Colour: black
• Typical use: short patching between ports, switches and patch panels

How to use

Use the cable to connect adjacent ports on switches, routers or patch panels where a compact, low-profile link is needed. Insert the RJ45 plugs fully into the device ports until they click to ensure a reliable electrical and mechanical connection. Route the flat cable along surfaces or through cable channels to minimise visibility and avoid sharp bends; a gentle curve preserves shielding and conductor integrity. For best performance, keep the cable away from strong sources of interference and avoid running parallel to high-voltage power lines over any distance.

What to consider before purchase

• Required cable length — 0.25 m is suitable only for very short connections
• Shielding needs — U/FTP offers pair-level foil shielding but requires compatible contact and grounding practices in your setup
• Compatibility with equipment port spacing and orientation in racks or panels

Usage recommendations

For neat installations, use this flat 0.25 m S-Conn patch cable to replace excess slack between closely spaced ports. Ensure metalwork or patch panels provide appropriate grounding when using shielded cables, and avoid sharp bends that can damage pair shielding.