S‑Conn Patch Cable Cat.6A, S/FTP double shielded, halogen-free, white, 3.0 m

S‑Conn Patch Cable Cat.6A, S/FTP double shielded, halogen-free, white, 3.0 m is a 3.0 metre Ethernet patch cable built for high‑speed LAN environments. The cable uses a Cat.7 quality raw core while being terminated and specified as Cat.6A, delivering support for 10 Gigabit Ethernet and improved signal integrity. Double shielding (S/FTP) reduces electromagnetic interference and alien crosstalk, and the halogen‑free jacket minimises toxic gas release in case of fire. The white jacket and flexible construction suit horizontal patching and rack connections in professional and home networks.

Advantages

The S/FTP double shielding provides enhanced protection against EMI and crosstalk compared with unshielded alternatives, improving throughput stability at higher frequencies. Using a Cat.7 raw core within a Cat.6A patch assembly increases pair isolation and reduces near‑end and far‑end crosstalk, which helps maintain reliable 10 Gigabit data transfers. The halogen‑free outer jacket reduces smoke toxicity in the event of combustion and is suitable for installations where low smoke and low toxicity materials are required. At 3.0 m length and with a standard RJ45 termination profile, this patch cable is easy to route in equipment racks and patch panels.

Suitable for

• 10 Gigabit Ethernet connections between switches, routers and servers
• Patch panels, wall outlets and short structured cabling runs in offices and data closets
• Home networks requiring higher bandwidth and improved EMI immunity
• Environments where low smoke and halogen‑free materials are preferred

When it may not be suitable

This 3.0 m Cat.6A S/FTP patch cable is intended for short to medium patching runs and rack connections; it is not a replacement for permanent in‑wall or long‑distance backbone cabling where different installation requirements and cable types apply. If your network does not require shielded cables or 10 Gigabit performance, an unshielded Cat.5e or Cat.6 cable may be a simpler and less expensive option.

Key specifications

• Standard performance: Cat.6A (supports up to 10 Gbps)
• Conductor/core: Cat.7 quality raw cable core (twisted pairs)
• Shielding: S/FTP double shielded (overall braid + individually shielded pairs)
• Jacket material: halogen‑free outer sheath
• Length: 3.0 m
• Connector: RJ45 male to RJ45 male
• Colour: white

How to use

Connect one RJ45 plug to your network device (switch, router, server or wall outlet) and the other to the corresponding port. Route the cable to avoid tight bends and strong mechanical stress; maintain the recommended bend radius to preserve shielding and pair geometry. For optimal performance in shielded installations, ensure proper grounding of connected shielded equipment and patch panels. Use strain relief at patch panels or equipment if available to reduce wear on the connectors during repeated moves.

What to consider before purchase

• Verify that your network devices and infrastructure benefit from Cat.6A and shielded cabling and that ports accept standard RJ45 patch cords
• Consider the required cable length and routing space; choose longer lengths if needed to avoid tension
• Confirm whether a halogen‑free jacket is necessary for your installation environment or local building codes
• Check grounding and earthing requirements for shielded installations to ensure proper EMI performance

Usage recommendations

For reliable 10 Gbps links, use this S‑Conn Cat.6A S/FTP patch cable for short interconnects between switches and servers while keeping shield terminations continuous and grounded. Avoid tight loops and secure the cable in racks or trays to maintain performance over time.