Fiber Optic Duplex Patch Cable S-Conn LC to SC OM4 violet 5.0 m

The Fiber Optic Duplex Patch Cable S-Conn LC to SC OM4 violet 5.0 m is a multimode duplex fiber patch cord designed for short‑reach high‑speed links. With an LC connector on one end and an SC connector on the other, OM4 graded multimode fiber and a 5.0 m length, the cable enables straightforward connection between LC and SC ports in data centers, LANs and telecom racks. The violet jacket color helps visual identification and cable management in dense installations.

Advantages

This S-Conn duplex patch cable offers OM4 multimode performance optimized for 10G, 40G and some 100G short‑reach applications where multimode fiber is used. The LC and SC connectors provide compatibility between common transceiver and patch panel interfaces. The 5.0 m length balances reach and excess length management for typical rack and cabinet layouts. The violet outer jacket improves visual separation of fiber runs and simplifies tracing during maintenance.

Suitable for

• Interconnecting LC and SC ports in data center patch panels
• Multimode fiber links for enterprise LAN and server farm cabling
• Short‑reach optical links for storage area networks and telecom equipment
• Organized fiber runs where color‑coded cables aid identification

When it may not be suitable

This OM4 multimode cable is not intended for singlemode long‑reach links; it is optimized for multimode transceivers and short‑range connections. It may not be appropriate where active components require matching connector types at both ends (for example, LC‑to‑LC or SC‑to‑SC links) unless adapter or panel configurations accommodate LC-to-SC interfacing.

Key specifications

• Fiber type: OM4 multimode fiber
• Configuration: Duplex (two fibers)
• Connector A: LC (female) on one end
• Connector B: SC (female) on the other end
• Length: 5.0 meters
• Jacket color: Violet
• Application: Short‑reach multimode links (data center, LAN, telecom)

How to use

Route the duplex cable between the LC and SC ports, ensuring correct orientation for transmit and receive channels. Insert the LC connector into the LC port and the SC connector into the SC adapter or equipment port until each connector latches. Avoid sharp bends and maintain the cable bend radius recommended for multimode fiber to prevent increased attenuation. Use cable management trays or ties to secure excess length and label both ends if required for identification.

What to consider before purchase

• Confirm your equipment accepts LC and SC connector types and that an LC-to-SC link matches port polarity and transmit/receive pairing.
• Verify that OM4 multimode fiber meets your bandwidth and distance requirements for planned transceivers (e.g., 10G, 40G).
• Check required cable length and route constraints to ensure 5.0 m is sufficient without excessive slack or tension.
• Consider color coding policies in your installation to ensure violet is acceptable for identification.

Usage recommendations

Handle connectors by the boot and connector body; keep protective caps on unused ends until installation to prevent contamination. Maintain manufacturer‑recommended bend radius and avoid pulling on the fiber itself; secure the cable in racks and patch panels to minimize strain and preserve optical performance.