Circuit breaker Schneider Electric WDE002805 16A 1P C

Schneider Electric WDE002805 16A 1P C is a single-pole miniature circuit breaker designed for protection of residential and light commercial electrical installations. The device interrupts excessive current caused by overloads and short circuits, complies with standard mounting dimensions for DIN-rail distribution boards, and provides consistent trip characteristics suitable for general-purpose circuits with moderate inrush currents.

Advantages

This 16A 1P C-type breaker combines compact dimensions with stable thermal-magnetic tripping behavior, ensuring accurate protection for wiring and connected equipment. Its C-characteristic makes it tolerant of short, moderate inrush currents typical for motors and fluorescent lighting while still responding quickly to actual faults. The breaker is designed for reliable electrical contact and simple installation and maintenance in standard consumer and small commercial switchboards.

Suitable for

• Protection of general lighting circuits and socket outlets in homes and apartments
• Small commercial and retail electrical circuits with moderate inrush loads
• Individual motor circuits and HVAC control circuits with short starting currents
• Replacement or expansion of distribution boards using standard DIN-rail modules

Key specifications

• Rated current: 16 A
• Number of poles: 1 (single-pole)
• Tripping curve: C (thermal-magnetic characteristic for moderate inrush tolerance)
• Type: miniature circuit breaker for DIN-rail mounting
• Application: overload and short-circuit protection for AC circuits
• Construction: compact module width suitable for standard distribution boards

How to use

Install the circuit breaker on a compatible DIN rail inside the distribution board, ensuring the supply is disconnected before mounting. Connect the line conductor to the input terminal and the load conductor to the output terminal, observing proper torque values for terminal screws and correct polarity. After installation, switch the breaker to the ON position and verify power is supplied to the protected circuit. In case of trip, identify and remedy the fault before resetting the breaker; reset by first switching to OFF, then back to ON.

Usage recommendations

Select this 16A C-characteristic breaker where circuits contain moderate inrush devices such as small motors, pumps, or lighting with electronic ballasts. Ensure coordination with upstream and downstream protective devices, verify conductor cross-sections and ambient temperature conditions to maintain correct tripping behavior, and follow local electrical codes for installation and periodic inspection.