The SCHRACK HSKP423HA5 is an F/FTP Cat.6a installation cable designed for structured cabling, data and telecommunication transmissions. It supports applications up to class Ea (500 MHz) including 10GBase-T, 1000Base-T and 100Base-TX, and is intended for indoor installations. The cable is offered on a 500 m wooden reel with a blue LS0H jacket and provides shielding for reduced electromagnetic interference.
Advantages
This F/FTP Cat.6a cable features four twisted pairs of AWG 23/1 conductors, measured performance to category 6a (class Ea) at 500 MHz, and a maximum standardized transmission rate of 10 Gbit/s. The LS0H outer sheath limits smoke and halogen emissions in case of fire, and the Dca -s2, d2, a1 reaction-to-fire classification meets building safety requirements for indoor use. The shielded design improves immunity to crosstalk and external noise, making it suitable for VoIP and PoE deployments.
Suitable for
- High-speed Ethernet networks (10GBase-T, 1000Base-T)
- Structured cabling in offices and data centers
- VoIP systems and Power over Ethernet (PoE)
- Indoor installations requiring LS0H materials
Key specifications
- Standard/class: Cat.6a, class Ea (500 MHz)
- Construction: F/FTP (foil overall, foil per pair)
- Conductors: 4 pairs, AWG 23/1
- Length: 500 m on wooden reel
- Outer sheath: LS0H, blue
- Nominal velocity of propagation (NVP): 0.79 c
- Maximum standardized transmission rate: 10 Gbit/s (per ČSN EN 50173-1)
- Reaction to fire class: Dca -s2, d2, a1
- EAN: 9004840714524
How to use
Install the SCHRACK HSKP423HA5 cable in accordance with local wiring regulations and structured cabling standards. Route and secure the cable to avoid sharp bends, excessive tension and sources of heat; maintain appropriate separation from power cables to minimise interference. Terminate the cable with compatible Cat.6a connectors or patch panels designed for F/FTP shielded cabling and ensure the shield is properly grounded at a single point to preserve EMC performance.
Usage recommendations
For optimal performance, perform certification testing after installation to verify attenuation, NEXT/FEXT and return loss meet Cat.6a (class Ea) limits. Store the wooden reel on a suitable spindle, avoid prolonged exposure to UV and moisture, and follow manufacturer guidelines for maximum pulling tension and minimum bending radius.
