SCP InfiniBand/fibre optic cable EFP-998-LSZH-50M MPO–MPO OM3 multimode 50 m, MPO/UPC aqua

SCP EFP-998-LSZH-50M is a 50 m multimode fibre optic patch cable for InfiniBand and high-speed data networks. The cable uses OM3 50/125 multimode fiber and MPO to MPO connectors with UPC polish, enclosed in an aqua-coloured LSZH jacket for reduced smoke and toxic emissions in case of fire. It is intended for datacentre interconnects, MPO trunking and parallel optics links that require high bandwidth and low insertion loss.

Advantages

The cable’s OM3 multimode construction provides support for high-speed links such as 100G when used with compatible transceivers and equipment. MPO-to-MPO termini with UPC polish ensure consistent mating performance and low back-reflection. The LSZH jacket offers improved safety in confined spaces by minimising smoke and halogen emissions, while the aqua colour makes identification straightforward in cable bundles.

Suitable for

• Datacentre uplinks and cross-connects
• MPO trunking and backbone installations
• Parallel optics links (e.g., 40G/100G applications with appropriate modules)
• High-density patching in equipment racks and patch panels

When it may not be suitable

This multimode OM3 cable is not suited for single-mode long-distance links where single-mode fiber is required for extended reach. It may also be unnecessary for low-bandwidth or short, simple point-to-point connections where a cheaper or shorter patch lead would be more economical.

Key specifications

• Fiber type: OM3 multimode (50/125 µm)
• Length: 50 m
• Connector type: MPO to MPO, UPC polish
• Jacket material: LSZH (low smoke zero halogen)
• Colour: Aqua

How to use

Route the cable through racks or containment pathways to avoid sharp bends and excessive tensile load. Mate the MPO connectors to corresponding MPO ports or cassettes ensuring proper key orientation and full insertion. Use appropriate strain relief and secure the cable to prevent movement; test links with an approved fibre tester to verify insertion loss and continuity after installation.

What to consider before purchase

• Confirm that connected equipment supports MPO connectors and OM3 multimode fiber
• Verify required channel length and loss budget for your transceivers and link design
• Check colour-coding and jacket material requirements for your site (LSZH vs. PVC)

Usage recommendations

Handle MPO terminations carefully, keep connector endfaces clean and use dust caps when not connected. For best performance in 100G and parallel optics applications, follow vendor guidelines for polarity and MPO cassette wiring, and validate each channel with an optical loss test set.