Coaxial Antenna Cable ShiverPeaks 80018, 100% Shielded, 10 m

ShiverPeaks 80018 is a 10 m coaxial antenna cable with 100% shielding designed for reliable RF signal transmission. Intended for connecting Wi‑Fi antennas, routers or radio equipment, it reduces electromagnetic interference and signal leakage. The cable is suitable for installations that require a long, fully shielded feed line to improve reception and maintain stable wireless performance.

Advantages

The ShiverPeaks 80018 cable features continuous full shielding to minimise external electromagnetic interference and prevent signal leakage. With a 10 m length it allows flexible placement of antennas and network equipment while maintaining signal integrity. The construction is intended to provide consistent RF performance for Wi‑Fi and radio applications where a fully shielded feed line is required.

Suitable for

• Connecting external Wi‑Fi antennas to routers and access points
• Extending feed lines for radio transceivers and receivers
• Installations that require reduced electromagnetic interference and improved reception
• Indoor and sheltered outdoor antenna placements where a 10 m cable is needed

Key specifications

• Cable length: 10 m
• Shielding: 100% full shielding to reduce EMI and signal leakage
• Application: coaxial antenna cable for Wi‑Fi, routers and radio equipment
• Connectors: straight plug and coupling designed for antenna connections
• Inner conductor: bare copper
• Cable outer diameter: approximately 9.5 mm

How to use

Connect one end of the ShiverPeaks 80018 coaxial cable to the antenna connector on the router, access point or radio device and attach the other end to the external antenna or antenna coupling. Route the cable to avoid sharp bends and sources of strong EMI. Ensure connectors are tightened according to the device connector type and mounted so that shielding continuity is maintained for optimal RF transmission.

Usage recommendations

For best results, avoid coiling the cable tightly and keep it away from power lines and large metal objects that can cause interference. Use the full shielding to maintain reception quality in environments with potential electromagnetic noise and verify connector compatibility before installation.