ShiverPeaks Slim Patch Cable Category 6 U/UTP 3.0 m red, 3.5 mm diameter, 2× RJ45 (BS08-22044)

ShiverPeaks Slim Patch Cable Category 6 U/UTP 3.0 m in red is a slim-profile Ethernet patch cord designed for Cat6 performance in home and office networks. The 3.0 m length and 3.5 mm overall diameter combined with two RJ45 connectors make this cable suitable for connecting switches, routers, patch panels and wall outlets where space is limited or cable runs are dense. It provides U/UTP (unshielded) Cat6 transmission characteristics for structured cabling and typical Ethernet applications up to the Category 6 specification.

Advantages

The slim 3.5 mm diameter simplifies routing through cable channels, trunking and behind equipment with limited clearance while preserving Cat6 signal performance for typical network setups. The unshielded U/UTP construction reduces bulk and stiffness compared with thicker shielded cables, making it easier to bend and manage in patching environments. The bright red jacket provides easy visual identification for network segmentation or fault tracing.

Suitable for

• Patch connections between switches, routers and wall outlets in home and office networks
• Cable runs through trunking, conduits or underfloor channels where space is constrained
• Server cabinets and network racks requiring tidy, low-profile patching
• Desktop connections for computers, VoIP phones and networked peripherals

When it may not be suitable

This is an unshielded U/UTP cable designed to meet Category 6 performance. It may not be suitable in environments with strong electromagnetic interference where shielded cable types are recommended. For installations requiring Category 6a or higher bandwidth or futureproofing for 10GBASE-T over long distances, thicker or higher-category cables should be considered.

Key specifications

• Cable category: Category 6 (Cat6) U/UTP
• Length: 3.0 m
• Cable diameter: 3.5 mm
• Connectors: 2 × RJ45 plugs
• Jacket colour: red
• Construction: slim, unshielded twisted pair

How to use

Insert each RJ45 connector into the corresponding network port on your devices until the latch clicks. Use this cable to link switches, routers, patch panels and wall ports for typical Ethernet connections. Route the cable through trunking or along rack channels, taking advantage of the slim profile to reduce crowding. Avoid sharp bends near the connectors and do not subject the cable to excessive tensile force to maintain signal integrity.

What to consider before purchase

• Whether an unshielded cable is suitable for the intended environment or if shielding is required
• Required length and whether 3.0 m matches the planned routing and device locations
• Whether Category 6 performance is sufficient or a higher category is needed for future bandwidth requirements
• Color coding needs for your network documentation and cable management

Usage recommendations

Use the cable for short to medium patch runs within racks, between wall outlets and network devices. Maintain gentle curves (radius at least several times the cable diameter), avoid kinking, and keep the cable away from strong EMI sources. For reliable connections, ensure RJ45 plugs are fully inserted and ports are aligned; replace cables if the jacket or connector shows visible damage.