Modular four-pole distribution terminal block Simet ShNK 4x11 for TS35 rail — 4x(7x6mm², 2x25mm², 2x35mm²)

The Modular four-pole distribution terminal block Simet ShNK 4x11 for TS35 rail is designed for organized power distribution and branch connections in control panels and electrical cabinets. It mounts on a standard TS35 DIN rail and provides four distribution poles with multiple connection points: each pole has seven 6 mm² conductor terminals, plus two larger tapping points rated for 25 mm² and two for 35 mm² conductors. The compact modular format enables centralized conductor grouping and simplifies wiring tasks in industrial, commercial and utility installations.

Advantages

This Simet ShNK 4x11 block combines multiple conductor entry sizes in a single modular unit, reducing the need for additional adapters or separate distribution blocks. The TS35 rail compatibility ensures secure and quick installation in standard enclosures. The design allows neat conductor routing, reliable electrical contact for a range of conductor cross-sections and straightforward expansion by adding adjacent modules on the rail.

Suitable for

• Power distribution and branching inside control panels
• Centralising conductors in switchboards and distribution cabinets
• Industrial automation and machine control wiring
• Service and maintenance wiring where multiple tap sizes are required

Key specifications

• Mounting: TS35 DIN rail compatible
• Poles: 4 distribution poles
• Small conductor terminals: 7 positions per pole for up to 6 mm² conductors
• Medium tapping terminals: 2 positions for up to 25 mm² conductors
• Large tapping terminals: 2 positions for up to 35 mm² conductors
• Modular width: fits standard modular DIN-rail spacing for side-by-side mounting
• Typical use: fixed copper conductors and flexible conductors with appropriate ferrules

How to use

Mount the terminal block onto the TS35 DIN rail by hooking the rear profile onto the rail and pressing until it clicks into place. Strip conductor insulation to the recommended length, fit ferrules if required, and insert conductors into the appropriate terminal clamp according to conductor cross-section. Tighten screws to the manufacturer’s torque recommendations and verify secure mechanical and electrical contact. Route conductors neatly along the rail and secure with cable ties or ducts as needed.

Usage recommendations

Use the 6 mm² terminals for multiple smaller feeders per pole and the 25 mm²/35 mm² taps for main feed or larger outgoing conductors. Always observe the panel’s current ratings, apply correct torque values to terminal screws, and follow local electrical regulations when selecting conductor types and protective devices.